00197490-03_SM_CP20-P-M2_EN保养维护 - 第3页
3 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018 Contents Contents 1 Introduction .. 5 1.1 Safety instructions .. 5 1.1.1 Conventions for the use of safety instructions and symbols .. 5 1.1.2…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00197490-03
www.asm-smt.com Printed by ASM Assembly Systems
3Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018
Contents
Contents
1 Introduction.. 5
1.1 Safety instructions.. 5
1.1.1 Conventions for the use of safety instructions and symbols.. 5
1.1.2 Safety instructions on hazardous materials.. 5
1.1.3 Safety instructions for the component sensor.. 6
1.2 Other instructions.. 6
1.2.1 Environmentally-friendly disposal of materials and components.. 6
1.2.2 Use of original accessories and spare parts.. 6
1.2.3 Information about this service manual.. 6
1.2.4 ESD guidelines.. 7
1.2.4.1 What does ESD mean?.. 7
1.2.4.2 Important measures to protect against static charging.. 7
1.2.4.3 Handling ESD modules.. 7
1.2.4.4 Measurements and modifications to ESD modules.. 7
1.2.4.5 Dispatching ESD modules.. 8
1.2.5 Validity of document.. 8
1.2.6 Release history.. 8
1.2.7 SIPLACE on the World Wide Web (WWW).. 10
1.3 Staff qualifications and training.. 10
1.4 Abbreviations.. 10
1.5 Tools required, measuring equipment and materials.. 11
2 Overview of the modules.. 15
2.1 Overview of C&P20 P/M2 parts.. 15
2.2 Differentiation of the SIPLACE C&P20 head variants.. 16
3 Usability package.. 17
3.1 Usability package contents for SIPLACE C&P20P.. 17
3.2 Fitting the usability kit for SIPLACE C&P20P.. 18
4 Component camera, Z axis and component sensor.. 25
4.1 Replacing the component camera.. 25
4.1.1 Board: LED driver BE VHS.. 28
4.2 Replacing the Z axis cover.. 29
4.3 Replacing the round magnets.. 31
4.4 Replacing the cover flex.. 33
4.5 Replacing the component sensor.. 36
5 DP drives.. 39
5.1 Replacing the DP drive.. 39
5.2 Replacing the DP drive hose.. 43
5.3 Replacing the clamping plate at the DP drive.. 45
4 Service Manual SIPLACE SpeedStar (C&P20 P / C&P20 M2) 03/2018
Contents
6 Pressure control valve (PRV).. 47
6.1 Replacing the PRV.. 47
6.2 Replacing the membrane and other small parts on the PRV.. 49
6.3 Replacing the exhaust tube.. 59
6.4 Calibrating the digital PRV.. 60
6.4.1 Zero point calibration of pressure control valve.. 60
7 Holding circuit, aperture ring and silencer.. 61
7.1 Replacing the holding circuit/reflecting ring.. 61
7.2 Replacing the seal disk on the aperture ring/holding circuit.. 68
7.3 Replacing the silencer (venturi mode only).. 68
7.4 Vacuum sensor holding circuit board for SIPLACE C&P20P.. 69
8 Return unit and return cylinder.. 71
8.1 Replacing the return unit.. 71
8.2 Replacing the return cylinder or return cylinder holder.. 74
8.3 Replacing the driver lever.. 75
9 Intermediate distributor.. 77
9.1 Replacing the intermediate distributor board.. 77
9.1.1 Intermediate distributor board for SIPLACE C&P20P [03110751-xx].. 79
10 Miscellaneous.. 81
10.1 Replacing the handle.. 81
11 Software functions.. 83
11.1 Zero point correction for the Star and Z axis.. 83
11.1.1 Transfer head specific data to the machine data after manual head exchange.. 83
11.2 Calibration.. 84
11.2.1 Calibrating the heads and cameras (SW70x).. 84
11.2.2 Calibration procedure.. 85
11.3 Transferring the head specific data (from SW701).. 86