Operating Instructions_VF366_en - 第30页
2|Technical data Description Recommended distance of the nozzle from the board (mm) 1…1.5 Positioning accuracy of the board (mm) ± 0.2 1 No superstructures and substructures must be fitted in a 3 mm edge area! 2 Option…
2|Technical data
2.2.4 Point and path soldering module
Description
Module type Point and path soldering module
Heating output (kW) 1.15
Solder content approx. (Kg) 13
Heat-up time to 280°C (h) 1.25
Maximum solder temperature (°C) 330
Minimum inside diameter of the solder
nozzle (mm)
3
Smallest outer diameter of the solder
nozzle (mm)
6
Maximum solder wave height (mm) 5
Minimum side clearance (mm) 3
Soldering speed X/Y axis (mm/sec) 10
X/Y axis positioning speed (mm/sec) 0.5…200
Positioning speed Z axis (mm/sec) 0.5…100
Positioning accuracy (mm) ± 0.15
Handling system 3-axis system with servo drives
Depending on the development stage, several soldering modules can be installed.
2.2.5 Solder feeding: Point and path soldering module
Description
Type of solder lead Solder wire
Maximum wire diameter (mm) 2
Maximum coil diameter (mm) 125
Maximum coil height (mm) 125
Maximum roller weight (Kg) 4
2.2.6 Single-track conveyor system
Description
Type Frameless conveyor system
Conveyor system Segmented single feeds
Conveyor speed (m/min) 0,2…10
Standard conveyor width (mm) 60…610
Type of conveyor width adjustment Motor driven, fixed rail in front
Conveyor angle (°), not adjustable 0
Board length (mm) 120…610
Board width (mm) 63,5…610
Max. board weight (kg) 8
Board overlay (mm)
1
3
Maximum height of components on the
PCB (mm)
120
Maximum height of components on the
PCB (mm)
2
30
Ersa GmbH Operating Instructions_VF366_en|Rev. 14|30/11/2017 29/551
2|Technical data
Description
Recommended distance of the nozzle
from the board (mm)
1…1.5
Positioning accuracy of the board (mm) ± 0.2
1
No superstructures and substructures must be fitted in a 3 mm edge area!
2
Optionals are possible up to 60 mm.
Ersa GmbH Operating Instructions_VF366_en|Rev. 14|30/11/2017 30/551
2|Technical data
2.2.7 Available optionals
X = Standard
O = Optional
Automatic solder feeder O
Solder wave height measurement X
Segmented conveyor X
Process monitoring with camera O
Network capability O
Remote maintenance O
Centre support in the soldering module O
Soldering material hold-down system O
Top compressed air heater O
Code reader (barcodes) O
Code reader (matrix) O
Bottom preheater, dynamic IR emitter
cassette
X
Door and window interlocking system
(process reliability)
O
CAD assistant O
Ersa GmbH Operating Instructions_VF366_en|Rev. 14|30/11/2017 31/551