00198608-02_SM_CP20P2_Kunde_EN - 第2页
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violat…
SIPLACE SpeedStar
(C&P20 P2)
Service Manual
01/2019 EN
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00198608-02
www.asm-smt.com Printed by ASM Assembly Systems
3Service Manual SIPLACE SpeedStar (C&P20 P2) 01/2019
Contents
Contents
1 Introduction.. 5
1.1 Safety instructions.. 5
1.1.1 Conventions for the use of safety instructions and symbols.. 5
1.1.2 Safety instructions on hazardous materials.. 6
1.1.3 Safety instructions for the component sensor.. 6
1.2 Other instructions.. 6
1.2.1 Environmentally-friendly disposal of materials and components.. 6
1.2.2 Use of original accessories and spare parts.. 6
1.2.3 Information about this service manual.. 6
1.2.4 ESD guidelines.. 7
1.2.4.1 What does ESD mean?.. 7
1.2.4.2 Important measures to protect against static charging.. 7
1.2.4.3 Handling ESD modules.. 7
1.2.4.4 Measurements and modifications to ESD modules.. 7
1.2.4.5 Dispatching ESD modules.. 8
1.2.5 Validity of Document.. 8
1.2.6 Release History.. 8
1.2.7 ASM on the World Wide Web (WWW).. 8
1.3 Staff qualifications and training.. 9
1.4 Abbreviations.. 9
2 Overview of the Modules.. 11
2.1 Overview of C&P20 P2 parts.. 11
2.2 Overview of torques and tools required.. 12
3 Component camera, Z axis and component sensor.. 13
3.1 Replacing the Component Camera.. 13
3.1.1 Board: Vision LED controller VLC48.. 16
3.2 Replacing the component camera cable.. 18
3.3 Replacing the Z axis cover.. 19
3.4 Replacing the round magnets.. 22
3.5 Replacing the flexible mounting plate.. 24
3.6 Replacing the cover flex.. 27
3.7 Replacing the component sensor.. 30
4 DP drives.. 33
4.1 Replacing the clamping plate at the DP drive.. 33
4.2 Replacing the DP drive and hose.. 34
5 Pressure control valve (PRV).. 39
5.1 Replacing the support plate on the PRV.. 39
5.2 Replacing the pressure control valve (PRV).. 41
5.3 Replacing the exhaust air hose.. 43