444CEMM1 - 第110页
Page 1-48 Check Every 140 Hours (Once a Week) 15. Close the safety cover . 16. T urn ON the servo switch. 17. Press Width adjust . 18. Press UNLOCK + continuous moving . • The movable side rail of the board conveyor goes…
Page 1-47
REGULAR
MAINTENANCE
1
Check Every 140 Hours (Once a Week)
8. Close the safety cover.
9. Turn ON the servo switch.
10. Press
UNLOCK
+ .
• The board holder moves down to the origin.
11. Press
UNLOCK
+ Conveyor Mid posi .
• The movable side rail of the board conveyor
moves to the middle position.
12. Turn OFF the servo switch.
13. Open the safety cover.
14. Apply grease to the width adjustment
ball screw and width adjustment
linear shaft on the board conveyor.
[Grease : SHELL STAMINA GREASE RL2]
∗ Apply grease to both rails on the middle
position.
To the next page
444C-E-MMA01-A06-04
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
2
1
Width adjustment
ball screw
Width adjustment
linear shaft
Pin change
Down
0306C0AA
Page 1-48
Check Every 140 Hours (Once a Week)
15. Close the safety cover.
16. Turn ON the servo switch.
17. Press Width adjust .
18. Press
UNLOCK
+ continuous moving .
• The movable side rail of the board conveyor
goes back and forth on the width adjustment
axis at full stroke, and spreads the grease over
whole area of the width adjustment ball screw
and width adjustment linear shaft.
19. Press
UNLOCK
+ .
• The board holder rises to the exchange
position.
20. Turn OFF the servo switch.
21. Open the safety cover.
22. Insert the support pin into the support
pin receiver.
∗ When the support pin batch exchange table is
pulled out, return it back.
“1-4-4 Cleaning the Support Pin Batch
Exchange Table”
444C-E-MMA01-A06-04
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
2
1
Pin change
Rise
Support pin
3
444C-417P
Page 1-49
REGULAR
MAINTENANCE
1
Check Every 140 Hours (Once a Week)
23. Close the safety cover.
24. Turn ON the servo switch.
25. Press
UNLOCK
+ .
• The board holder moves down to the origin.
444C-E-MMA01-A06-03
Pin change
Down
OFF ( )
ON ( )
SERVO