444CEMM1 - 第22页
Page 10 SAFETY PRECAUTIONS Be sure to observe WARNING L13EB DO NOT DISABLE SAFETY SENSOR. Y ou will have serious injury by active part if you disable safety sensor . Do not remove the sensor , put any objects in or turn …
Page 9
SAFETY PRECAUTIONS
Be sure to observe
444C-E-XXA00-A03-02
WARNING
Page 10
SAFETY PRECAUTIONS
Be sure to observe
WARNING
L13EB
DO NOT DISABLE
SAFETY SENSOR.
You will have serious injury by
active part if you disable safety
sensor.
Do not remove the sensor,
put any objects in or turn off
the switch so that the safety
sensor work properly and
effectively.
WORKER OPERATING
IN THE BACK.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker behind the machine.
Make sure that no worker is
in the back when machine
starting.
L18EB
WORKER OPERATING
IN THE FRONT.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker in front of the machine.
Make sure that no worker is
in the front when machine
starting.
L19EB
M09E
TAKE CARE NOT TO
PINCH YOUR HANDS
OR FINGERS.
You will have serious injury if
your hands or fingers are
caught in the conveyors during
manual (or automatic) width
adjustment.
TURN OFF THE
SERVO SWITCH BE-
FORE PLACING A
BOARD ON OR RE-
MOVING IT FROM THE
CONVEYOR.
You will have serious injury if
the machine is actuated.
M35E
L11E
WATCH YOUR HANDS
OR FINGERS.
You will have serious injury if
you touch active part.
444C-E-XXA00-A03-02
L14EB
ELECTRIC SHOCK.
You will have serious electric
shock if you touch electric
active part inside.
TURN OFF THE
POWER AND AIR BE-
FORE TOUCHING THE
CUTTER AREA DUR-
ING MAINTENANCE.
You may potentially be injured
by the cutter area if the ma-
chine is actuated.
L43E
Page 11
SAFETY PRECAUTIONS
Be sure to observe
WARNING
M08E
ONLY THE PERSON IN CHARGE OF
MAINTENANCE MUST REPAIR OR
ADJUST THE MACHINE.
The machine may be incorrectly repaired or ad-
justed, resulting in malfunction.
Have the machine repaired or adjusted by a
trained professional maintenance engineer.
Consult the manufacturer for training.
DO NOT PLACE YOUR HANDS OR
BODY INSIDE ACTIVE PART OF THE
MACHINE WHEN IT IS IN A SINGLE
STOP OR CYCLE STOP CONDITION.
The machine has been stopped only temporarily.
You may be injured if the sensors are actuated and
the machine moves unexpectedly.
Turn OFF the servo switch before placing your
hands or body inside the active part.
M34EB
M11E
DO NOT ALLOW ANY PERSON WHO
HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MA-
CHINE.
The machine may be operated improperly and
injure you.
Either carry out training by yourself, or consult
the manufacturer.
M62EB
DO NOT TURN OFF THE SERVO
SWITCH DURING
OPERATION.
The machine may get out of control and injure you.
Before turning OFF the servo switch, bring the
machine to a temporary stop state, such as a
single stop state and a cycle stop state or an
operation stop state.
M63E
DO NOT MOVE ANY AXES (INCLUD-
ING HEADS) MANUALLY WHILE
TURNING OFF AND THEN ON THE
SERVO SWITCH UNDER A SINGLE
STOP, CYCLE STOP OR MACHINE
ADJUSTMENT MENU.
The machine may be actuated suddenly and injure
you when the servo switch is turned on.
If any axes (or the heads) are moved, press the
emergency stop button, and then reset the
switch. Restart operation through the main
menu.
444C-E-XXA00-A03-01
M02EB
BEFORE INSPECTING PNEUMATIC
EQUIPMENT, CUT OFF THE AIR
SUPPLY AND EXHAUST AIR FROM
THE COMPONENTS.
You will have serious injury if the residual pressure
actuates the machine.
Before inspecting pneumatic equipment, cut off
the air supply and exhaust the air from the
equipment.
Switch OFF the power.