444CEMM1 - 第26页
Page 14 SAFETY PRECAUTIONS Be sure to observe CAUTION 444C-E-XXA00-A03-00 M27E DO NOT GIVE A SHOCK T O THE ELEC- TRICAL EQUIPMENTS. There is a risk of an electric shock, leak or malfunction of the machine. M25E BE CAREFU…
Page 13
SAFETY PRECAUTIONS
Be sure to observe
CAUTION
444C-E-XXA00-A03-01
M15E
DO NOT PLACE ANY
OBJECT AROUND
EMERGENCY STOP
BUTTONS.
You will be unable to press a
button to stop the machine in
case of emergency.
DO NOT PLACE ANY
OBJECTS ON THE
COVER.
The cover may break due to the
weight of the objects and injure
you.
M16EB
M17EB
BE CAREFUL WITH
YOUR HANDS AND
FINGERS WHEN
CLOSING THE
COVER.
Your hands or fingers may be
caught in the cover and injured.
M24EB
TAKE AWAY TOOLS
FROM THE INSIDE OF
THE MACHINE.
The machine may malfunction
as a result of a tool left inside.
Before operating the ma-
chine, verify that no tools are
left inside.
M18E
DO NOT CLIMB OR
RIDE ON THE MA-
CHINE.
You may fall from or get caught
in the machine and get injured.
ONLY THE PERSON IN
CHARGE MUST
CHANGE THE DATA.
Incorrect operation may cause
runaway or abnormal action of
the machine. And it may injure
you.
The data must be
changed only by a trained
specialist in charge.
M23EB
Page 14
SAFETY PRECAUTIONS
Be sure to observe
CAUTION
444C-E-XXA00-A03-00
M27E
DO NOT GIVE A
SHOCK TO THE ELEC-
TRICAL EQUIPMENTS.
There is a risk of an electric
shock, leak or malfunction of
the machine.
M25E
BE CAREFUL OF THE
WEIGHT OF THE
FEEDER.
A large feeder is so heavy that
it may be damaged or injure
you if it is dropped.
DO NOT DISAS-
SEMBLE THE CAM-
ERA UNIT.
You may be injured or the
machine may break down.
If a breakdown occurs,
consult the manufacturer.
M41EB
BEFORE PERFORMING AUTOMATIC
WIDTH ADJUSTMENT, BE SURE TO
VERIFY NO BOARDS OR OTHER
OBJECTS ARE ON THE CONVEYOR.
Boards or other objects may drop from the con-
veyor, causing damage to the boards or the ma-
chine.
If there are any boards or other objects on the
conveyor, turn OFF the servo switch and remove
them.
M36E
M20EB
DO NOT BLOCK OFF THE OUTLET
OR INLET OF THE FAN.
The temperature inside the machine will rise and
the machine may act abnormally. And it may injure
you.
Do not block off the outlet or inlet of the fan.
Periodically clean the filters of the outlet and
inlet.
M44E
WEAR A PROTECTIVE HAT AND
GOGGLES FOR MAINTENANCE
WORK.
Your head or eyes may be injured while perform-
ing maintenance work.
M39EB
CARRY OUT PERIODIC MAINTE-
NANCE AND INSPECTION.
If you fail to carry out periodic inspection and
maintenance, the machine cannot exhibit its true
performance or may break down.
Periodic inspection and maintenance should be
carried out by a trained person in charge of
maintenance according to the instructions in
Page 15
SAFETY PRECAUTIONS
Be sure to observe
CM202-DS(Danger labels)
The following danger labels are pasted on this machine. Follow the instructions on each label. If a label has
come off, put a new one on a proper position. To order a label from the manufacturer, refer to PARTS LIST.
M32E
444C-E-XXA00-A04-03
The labels for safety pasted on the product
The positions of danger labels on the front side
Label part No.
E24C-AA00