444CEMM1 - 第76页

Page 1-14 Outline of Maintenance 3. Press Ye s . • The update is started. • The message “ Update complete “ is displayed when the update finishes successfully . ∗ The message “ Restart the system “ is displayed when the …

100%1 / 158
Page 1-13
REGULAR
MAINTENANCE
1
Outline of Maintenance
Version history
The updated history of the machine system and recognition system is displayed.
The machine system or recognition system is displayed at the line item, and the date when it is
updated and that version No. appears in descendent order.
1-1-6 Component Unit Update (Update of Each Board System)
1. Press Compo unit update at the “Ma-
chine maintenance menu” screen.
2. Select the contents to be installed,
and insert the corresponding floppy
disk, then press Update start .
• The program software of the head axis driver
can be installed.
444C-E-MMA01-A01-02
444C-EEn-MpMm-002
To the next page
Page 1-14
Outline of Maintenance
3. Press Yes .
• The update is started.
• The message “Update complete“ is displayed
when the update finishes successfully.
∗ The message “Restart the system“ is displayed
when the installation is complete successfully.
Turn on the power of the machine again.
1-1-7 Action Check
The feeder sending can be checked.
1. Press the Action check on the “Ma-
chine maintenance menu” screen.
∗ Choose the feeder address that is a target for
movement.
The target for movement is a light blue and
highlighted.
• Select Continuous moving , Out or Set
and check the feeder sending of the moving
target address.
• The continuous moving repeats out and set
reserved count.
• It is possible to set from 1 to 100 times by
pressing count set .
∗ The moving time of the nozzle cylinder is
measured.
444C-E-MMA01-A01-04
444C-EEn-MpMm-002
Page 1-15
REGULAR
MAINTENANCE
1
1-2 Lubricating
This section describes how to set the cartridge of the grease gun included with the machine as an
option, how to supply grease, and the precautions for a lubricating.
The structure of a grease gun
The grease gun consists of following 4 parts.
Make sure of firm setting of the nozzle to the main body, before use.
Cartridge (200 g)
Nozzle
Oil cylinder
Grease gun
433C-036P 433C-037P
444C-E-MMA01-A02-05
444C-510P
Grease nozzle type
(For CM201-DS and CM202-DS, this is not required.)