444CEMM1 - 第79页
Page 1-17 REGULAR MAINTENANCE 1 Lubricating Using the grease gun 1. Insert the nozzle tip into the grease nipple. 2. Pump the lever several times. ∗ Make sure of full opening and closing of the lever completely . Insuffi…
Page 1-16
1-2-1 Loading and Using the Grease Gun
Loading the grease gun
1. Remove the cap from the cartridge,
and screw it into the grease gun.
∗ The looseness may cause leak of the grease.
2. Pull out the chain and lock it to the
groove of the oil cylinder.
3. Put the cartridge in the oil cylinder
and fit the cylinder to the main body.
4. Unlock the chain from the groove of
the oil cylinder, and put it back.
∗ Pump the lever several times, and ensure that
grease is coming from the nozzle tip.
Lubricating
433C-038P
433C-039P
433C-040P
433C-041P
444C-E-MMA01-A02-02
1
2
1
2
1
2
Chain
Page 1-17
REGULAR
MAINTENANCE
1
Lubricating
Using the grease gun
1. Insert the nozzle tip into the grease
nipple.
2. Pump the lever several times.
∗ Make sure of full opening and closing of the
lever completely. Insufficient movement of the
lever does not pump the grease in the car-
tridge.
3. Remove the nozzle from the grease
nipple.
∗ Make sure of cleaning the grease which is
crowded out with a cloth.
444C-E-MMA01-A02-02
433C-042P
1
2
Page 1-18
Lubricating
1-2-2 Greasing Point
NOTICE
Use proper quantity of grease for each greasing point.
Extra oil will spread and stick to the camera.
Be careful not to contaminate the belt with grease. Remaining grease will deterio-
rate the belt early.
Main parts requiring lubrication
Lubricating the linear bearings
1. Move the sliding unit to the edge.
2. Clean the old grease.
∗ Use a cloth.
3. Lubricate.
a.Grease nipple is on the sliding unit
Grease through the grease nipple with a
grease gun.
b.Without the grease nipple
Directly apply the grease to the groove of the
rail. It is unnecessary to apply it to other place.
4. Move the sliding unit slowly at full
stroke.
Lubricate the ball screw alike.
Some unit can be automatically moved at full
stroke by selecting on the “Maintenance
Motions” screen.
Oils
∗ As for the handling instructions about grease, refer to MATERIAL SAFETY DATA SHEET.
Linear bearing Ball screw Bearing and cam follower
273C-IL087
444C-E-MMA01-A02-03
433C-125E
433C-124E
444C-407TE
.oN stniopgnitacirbuL liO esuotliO rerutcafunaM
1)swercsllabrogniraebraenil(tinuY-XesaerG2LRESAERGANIMATSLLEHSLLEHSAWOHS
2)gniraeb(daehrefsnarT
esaergeniroulF
muucavrof
V/LEIATREIRRABREBULKKON