444CEMM1 - 第85页

Page 1-23 REGULAR MAINTENANCE 1 Check Every 24 Hours (Routine) 2. Draw out the used tape box. 3. Cast off the used tape in the used tape box. 2. The cutting unit is not set 1. Cut off the tape coming out of the outlet of…

100%1 / 158
Page 1-22
Check Every 24 Hours (Routine)
1-3-4 Cleaning the NG Chip Discharge Box (after Operation)
After the production, clean the NG chip discharge box.
1. Turn OFF the power.
2. Open the safety cover.
3. Empty chips in the NG chip discharge
box.
∗ This picture shows the one for CM201/202-DS.
1-3-5 Cleaning the Used Tape Box (after Operation)
After the production, clean the used tape box.
∗ The used tape box is optional.
∗ Clean the used tape box during the production as well as after the operation.
CM201-DH, CM202-DH/DHU/DK, CM201-DS, CM202-DS
1. The cutting unit is set
1. Open the cutting unit cover.
Tools Required time 1 minute
NG chip discharge box
444C-522P
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
Cutting unit cover
444C-E-MMA01-A03-06
4H4C-502P
To the next page
∗ While the cutting unit cover is open, the cutter
will not work for safety. After cleaning, be sure
to close it.
Tools Scissors Required time 3 minutes
E24C-401P
CM201-DH,
CM202-DH/DHU/DK
Cutting unit cover
CM201-DS, CM202-DS
Page 1-23
REGULAR
MAINTENANCE
1
Check Every 24 Hours (Routine)
2. Draw out the used tape box.
3. Cast off the used tape in the used
tape box.
2. The cutting unit is not set
1. Cut off the tape coming out of the
outlet of the used tape duct.
∗ Be careful not to cut the connecting cable or air
tube in using the bulk feeder (option).
2. Cast off the tape or dust in the used
tape box.
CM201-D/DU, CM202-D/DU
1. Cut off the tape coming out of the
outlet of the used tape duct.
∗ Be careful not to cut the connecting cable or air
tube in using the bulk feeder (option).
∗ When the cutting unit (option) is installed, you
do not need to cut off the used tape.
2. Cast off the tape or dust in the used
tape box.
444C-E-MMA01-A03-01
Used tape box
4H4C-503P
Used tape ductUsed tape box
Used tape
444C-406P
Used tape ductUsed tape box
Used tape
444C-406P
E24C-402P
CM201-DH,
CM202-DH/DHU/DK
CM201-DS, CM202-DS
Used tape box
Page 1-24
444C-E-MMA01-A04-03
1-4 Check Every 140 Hours (Once a Week)
1-4-1 Cleaning the Color Touch Panel
Clean the color touch panel. Dirt on it may cause the fault operation.
1. Turn OFF the power.
2. Clean the color touch panel with a
cloth.
∗ Do not use solvents, and be careful not to give
shock or damage to the panel.
∗ If contamination is serious, wipe it off with a
cloth (damped, drained, and then wrung well),
being careful not to drip a liquid onto electronic
components.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
444C-407P
Tools Required time 1 minute Cloth