00197295-01_UM_D4i_SR605_EN - 第16页
1 Introduction User manual SIPLACE D4i 1.1 Machine description From software version SR.605.03 SP2 10/2012 EN edition 16 downward comp atible and therefore may also be used for the previous version of the ma- chine. 1 – …
User manual SIPLACE D4i 1 Introduction
From software version SR.605.03 SP2 10/2012 EN edition 1.1 Machine description
15
1
Fig. 1.1 - 1 The SIPLACE principle
1.1.3 New options and performance features
The following options are available to extend the machines' functionality:
– 01005 package
The SIPLACE D4i placement machines are prepared to place 01005 components. For place-
ment simply retrofitting of the 12-nozzle Collect&Place head with the 01005 package is nec-
essary. For the upgrade to the 01005 package a new CO camera is no longer needed, if the
0201 package is installed. 1
– 0201 package
We can supply the 0201 package for processing 0201 components with the 12-nozzle
Collect&Place head. The 0201 package can be chosen as standard on the placement ma-
chines. 1
– Component trolley
The design of the component trolley has been revised. Fixed handles replace the folding han-
dles. This saves time when changing the component trolley. The new component trolley is
1 Introduction User manual SIPLACE D4i
1.1 Machine description From software version SR.605.03 SP2 10/2012 EN edition
16
downward compatible and therefore may also be used for the previous version of the ma-
chine. 1
– Second level reel holder
When using a maximum set-up of 3 x 8 mm feeder modules, the tape reels may be restrained
in the base container and impede the handling of the tape reels. The second level reel holder
allows to swap tape reels which are restrained in the base container to the second level reel
holder and thus to ease the handling. The elevated arrangement of the second level reel
holder improves the ergonomics when setting-up and refilling components. 1
– CO camera, type 30
The CO camera, type 30, replaces the CO cameras, type 29 and type 38. It allows to optically
center 0201 components as well as 01005 components. 1
– Machine protection
The protective cover was redesigned. The central ridge of the previous D series machines is
removed. When the protective covers are open, unrestricted access to the inside of the ma-
chine is possible. 1
User manual SIPLACE D4i 1 Introduction
From software version SR.605.03 SP2 10/2012 EN edition 1.1 Machine description
17
1.1.4 Serial number of the machine
The serial number of the machine is punched in the rating plate (see item 1). The rating plate is
fixed to the outside of location 1 (see item 2).
1
Fig. 1.1 - 2 Serial number of the machine
(1) Rating plate
(2) Position of the rating plate on the machine