00197295-01_UM_D4i_SR605_EN - 第28页
1 Introduction User manual SIPLACE D4i 1.5 Important notes on the user manual From software version SR.605.03 SP2 10/2012 EN edition 28 EMC Electromagnet ic compatibility EGB Electrostatically-sen sitive group of compone…
User manual SIPLACE D4i 1 Introduction
From software version SR.605.03 SP2 10/2012 EN edition 1.5 Important notes on the user manual
27
1.5.5.3 Documentation packages, 10/2012 edition
1
1
PLEASE NOTE 1
Further information about the station extensions such as assembly, operation and preventive
maintenance described in Chapter 6 can be found on the SIPLACE homepage. 1
1.5.6 Abbreviations
1
Package contents Language
a
Item no.
DVD product documentation incl. parts catalogs
(PDF and HTML), in German and English
Detailed circuit diagrams folder in German/English
Operating instructions in the ordered language
version
Preventive maintenance in the ordered language
version
Software instructions: First Steps 605 in the ordered
language version
JobGuides / JobPoster
in the ordered language version
Angle gauge / tape gauge in the ordered language
version
German 00197312-01
English 00197313-01
French 00197314-01
Italian 00197315-01
Spanish 00197316-01
Portuguese 00197317-01
Hungarian 00197318-01
Czech 00197319-01
Russian 00197320-01
Polish 00197321-01
Estonian 00197322-01
Finnish 00197323-01
Swedish 00197324-01
Danish 00197325-01
Dutch 00197326-01
S. Chinese 00197327-01
Korean 00197328-01
Japanese 00197329-01
a) Other language available on request
C&P Collect&Place
C&P12 Collect&Place head with 12 nozzles
CO Component
DC Dual conveyor
DCA Direct chip attach
1 Introduction User manual SIPLACE D4i
1.5 Important notes on the user manual From software version SR.605.03 SP2 10/2012 EN edition
28
EMC Electromagnetic compatibility
EGB Electrostatically-sensitive group of components
ESD Electrostatic sensitive device
FC Flip chip
GND Ground
IC Integrated circuit
MC Machine controller
OSC Odd shaped components
PA Placement area
PCB Printed circuit board
SC Single conveyor
SC Station computer
SM Dual conveyor in Single conveyor mode
SMD Surface mounted device
VS Vision system
WLAN Wireless Local Area Network
User manual SIPLACE D4i 2 Operational safety
From software version SR.605.03 SP2 10/2012 EN edition 2.1 Safety instructions
29
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This User Manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
DANGER or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment will occur if the danger instructions are not followed.
2
WARNING or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment may occur if the warning instructions are not followed.
2
CAUTION or
as used in this User Manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
PLEASE NOTE
as used in this User Manual provides information on the product or indicates a part of the User
Manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.