OM-1352-003_w.pdf - 第26页
1-5 Tg1357-ID-SO 1.3 Names and Functions of Each Section [5] Syringe [6] Needle [4] Motor [3] T ransparent Cover [2] Squeegee [1] Drum (Rotational Disk) [7] Drawer Connector 1 [8] Drawer Connector 2 Fig.1 [1] Drum (Rotat…
1-4
Tg1357-ID-SO
0703-003
Table 1-3
Item Description
11. Dustproof
Measures
A transparent cover can be installed on the flux supply position.
12. Component
Loading System
Multi-Layer Tray Feeder (FP-G100),
Shuttle Feeder (FP-G300), and Tape Feeder (GT-****)
Note: The handling component size shall condorm to the tray specifications.
13. I/O Interfaces HLS and serial communications systems are used for the I/O interfaces.
Ref.: Through Drawer Connector of Feeder Base
14. Dimensions
Main Unit : Approx. 84 mm (Width) × 548 mm (Depth) × 165 mm (Height)
Attachment : Approx. 76 mm (Width) × 282 mm (Depth) × 128 mm (Height)
15. Mass Approx. 7.5 kg
16. Others
•
A spring nozzle ZX28 (option) is separately required.
1.2 Specifications of Flux Dispensing Unit
1-5
Tg1357-ID-SO
1.3 Names and Functions of Each Section
[5] Syringe
[6] Needle
[4] Motor
[3]
Transparent
Cover
[2] Squeegee
[1] Drum (Rotational Disk)
[7] Drawer Connector 1
[8] Drawer Connector 2
Fig.1
[1] Drum (Rotational Disk)
From this position flux is dispensed.
[2] Squeegee
It makes for an even flux coating thickness.
[3] Transparent Cover
It is a transparent cover for dustproofing.
0703-003
1.3 Names and Functions of Each Section
1-6
Tg1357-ID-SO
[4] Motor
It rotates the drum (rotational disk).
[5] Syringe
It supplies flux.
[6] Needle
It supplies flux on the drum (rotational disk).
[7] Drawer Connector 1
It supplies power to this device and controls the power to the main
machine (GXH Series).
Note
When the tape feeder power unit is used, connect the cable to the
drawer connector 1 on this machine.
[8] Drawer Connector 2
It supplies power to this device and controls the power to the main
machine (GXH Series).
0703-003
1.3 Names and Functions of Each Section