00193688-03.pdf - 第100页
4 Configuration Installation and Configuration Guide SIPLACE Explorer 4.2 Configuring the Factory Configuration Utility Edition 02/2005 EN 100 NOTE The access to the Runtime Envir onm ent tools is restricte d or per mitt…
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.2 Configuring the Factory Configuration Utility
99
→ Enter the following information here:
– the website URL;
This URL contains a port number, which applies to the web server (Tomcat 5.0) e.g. "8080".
If you change the port number here, you will also need to update the port number of the web
serversiehe “Port Configuration after Changing Tomcat Port Number” auf Seite 60.
– the refresh rate;
For capacity purposes, we recommend a refresh rate of at least one minute (60000 ms).
– website language
– line host address;
– specify whether a login page is to be generated
→ Also you can uncheck the Enable site generation check box in order to skip website
generation and do it later while editing the generated application. After the website settings
have been defined or if you decide to skip this step, click Finish.
At this point, the application is generated automatically and is loaded into SIPLACE Explorer.4
4.2 Configuring the Factory Configuration Utility
4.2.1 Starting the SIPLACE Factory Configuration Utility
→ Start the SIPLACE Factory Configuration Utility via the Programs → SIPLACE Explorer
2.0 → Factory Configuration Utility menu in Windows.
4
Fig. 4 - 39 RTE Windows Start menu
→ Or click on the Factory Configuration Utility icon on your desktop.
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.2 Configuring the Factory Configuration Utility Edition 02/2005 EN
100
NOTE
The access to the Runtime Environment tools is restricted or permitted as required, by using
the SE Security Manager. For details of the relevant settings in the SE Security Manager,
please refer to the Getting Started for SIPLACE Explorer 2.0. 4
→ The Load settings from... dialog box will open. You need to establish the connection to the
factory database, before data can be called up.
4
Fig. 4 - 40 Factory - load settings from
→ Please specify the following information:
–Host name
– Port number
– Database name
–User name
– Database password
→ Confirm your entries with OK.
→ The Factory Configuration Utility dialog box will open.
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.2 Configuring the Factory Configuration Utility
101
4.2.2 Configuring Production Lines
SIPLACE Explorer Factory Configuration Utility can be used to add production lines to an existing
list of lines to be monitored. This is performed by calling up the relevant production line data from
the SIPLACE Explorer host. A list of the lines already configured in SIPLACE Explorer will be pro-
vided via the connection to the SIPLACE Explorer host. 4
NOTE
We do not recommend that you change the production line data in SIPLACE Explorer Factory
Configuration Utility. If you do so, you must also adjust/synchronize this data in the SIPLACE
Explorer host. 4
After editing the data in Factory Configuration Utility, save the modified data in the factory data-
base in which all Factory Configuration Utility data are stored. During data backup, data is sent
between the SIPLACE Explorer line host and the factory host. To be more exact, the sequence of
transfer is from the SIPLACE Explorer factory host to the line host and from the SIPLACE Explorer
line host to the SIPLACE Explorer factory host. 4
Transfer of data from SIPLACE Explorer factory host to SIPLACE Explorer line host: 4
– Factory calendar
– Factory database settings
– Central user management, with e-mail accounts
Transfer of data from SIPLACE Explorer line host to SIPLACE Explorer factory host: 4
– Line names
–Line URLs