00193688-03.pdf - 第76页
4 Configuration Installation and Configuration Guide SIPLACE Explorer 4.1 Standard Monitoring Application (SMA) Edition 02/2005 EN 76 – S tep 2 - Perform Configuration T est → At S tep 2 you can chan ge your settings. Th…
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.1 Standard Monitoring Application (SMA)
75
– Step 1- Connection to Database
→ At Step 1 you will need to specify your login and password to access the MS SQL Server.
Click on Next to continue.
NOTE
Please note that users must have DB administrator privileges to perform necessary tests and
configuration. 4
4
Fig. 4 - 12 Step 1- database connection wizard
At this point, the wizard will connect to the MS SQL Server and run tests to identify whether
the specified database, login and user roles exist. You will see a list of changes that the
wizard will undertake to perform setup and configure the system database. 4
4 Configuration Installation and Configuration Guide SIPLACE Explorer
4.1 Standard Monitoring Application (SMA) Edition 02/2005 EN
76
– Step 2 - Perform Configuration Test
→ At Step 2 you can change your settings. This is also where you define the name of the SE
system database for the line and where you specify the user (and password) who is to have
access to this database.
4
Fig. 4 - 13 Step 2- database connection wizard
→ Once you have made and checked all entries, click on Next to continue.
Installation and Configuration Guide SIPLACE Explorer 4 Configuration
Edition 02/2005 EN 4.1 Standard Monitoring Application (SMA)
77
– Step 3- Configure Database
→ Step 3 takes your modifications from Step 2 and uses them to configure the database
connection.
4
Fig. 4 - 14 Step 3- database connection wizard
→ Click on Finish and the wizard will carry out the required configuration. The DB settings
have now been correctly specified for your project and the database and set user will be
created.
→ You will receive a success message.
4
Fig. 4 - 15 Step 3- database connection wizard
→ Click OK. Continue with Step 5 - Configure System Database.
→ After creating the database connection, define the maintenance for the system database with
the Maintenance button.