OM-1606-006w_GT-28x.pdf - 第147页

OM-1606 6. Splicing 6-45 0908-001 6.10.5 Precautions (1) Cut and splice the carrier tape so that there is no overlap of the carrier tape on the joint position. Cut off the tape at an angle of 90 degrees to the long side …

OM-1606

6-44

6. Splicing

1005-002

Bend the splicing tape along the

perforations and adhere it onto the

carrier tape on the sprocket hole

border side.

In order to adhere the splicing tape

securely, press and rub the surface

of the transparent lm entirely.

Peel off the transparent lm.

For the tape with 44 mm, 56 mm,

72 mm or 88 mm width, adhere the

splicing tape also onto the slave

sprocket hole side.

Conrm that the splicing tape has

been adhered securely to the cover

tape and the carrier tape surfaces.

When the tape has been spliced

securely, the procedure is completed.

OM-1606

6. Splicing

6-450908-001

6.10.5 Precautions

(1) Cut and splice the carrier tape so that there is no overlap of the

carrier tape on the joint position.

Cut off the tape at an angle of 90 degrees to the long side and at the

same position, based on the sprocket hole.

If there is any overlap, the tape might be caught or clogged in the tape

suppressor.

Overlap

(2) When the splicing tape is adhered, set the center of the cut position of

the splicing tape.

If the tape is deviated along the direction of the splicing tape, the tape

spliced section might come off.

Positional Deviation

(3) Do not let the splicing tape swell very far out from the carrier tape.

If there is any swell out, a feed error might occur.

OM-1606

6-46

6. Splicing

1005-001

6.11 Splicing Procedure using a Metal Plate

Procedure

(1) Cut the new tape and tape on the feeder side according to the splicing

procedure for each tape width.

(2) Set the metal plate on the caulking jig.

Metal Plate

Caulking Jig

(3) Set the tape to be spliced on the metal plate.

(4) Caulk the metal plate using the caulking jig. At that time, take care not to

catch your nger between the caulking jig and metal plate.

Status where the metal

plate has been caulked