OM-1606-006w_GT-28x.pdf - 第158页
OM-1606 7-8 7. Maintenance 7.4.3 Cover T ape T ake-up Section T ape Guide Roller Every week Cleaning Clean it with a rag soaked in alcohol. FG7 0908-001
OM-1606
7-7
7. Maintenance
Peeling Section
Every week Cleaning
Notice
If the cover tape is set while it has
any debris of cover tape on it,
then it might cause suppressor
deformation or pick-up error.
Lift the suppressor and clean it with a Cotton
swab or toothbrush.
FG5
Pick-up Position
Every Three Months Check, Adjustment
Check the pick-up position, using the feeder adjusting jig
JG-0209 (Purchase separately).
If the pick-up position is not correct, adjust it.
FG6
0908-001
OM-1606
7-8
7. Maintenance
7.4.3 Cover Tape Take-up Section
Tape Guide Roller
Every week Cleaning
Clean it with a rag soaked in alcohol.
FG7
0908-001
OM-1606
7-9
7. Maintenance
7.4.4 Component Discharging Section
Air Blow
Discharging Outlet
Every week Cleaning
Blow the air in the direction of
the discharging outlet.
(The components are discharged
from the opening opposite to this
outlet).
When any component is
removed using air-blow,
the components might
scatter around, so perform
this operation paying
attention to the surrounding
condition.
Note
FG8
0908-001