OM-1606-006w_GT-28x.pdf - 第192页
OM-1606 8-9 8. Specications of T ape Feeders 8.3 Specication of 24/32 mm T ape Feeder Model T ape Width × Feed Pitch (mm) T ypes of T ape Standard Set Reel Outer Diameter × Width (mm) Chute Height (mm) Referential Comp…
OM-1606
8-8
8. Specications of Tape Feeders
(f) Use a taping on condition that the component itself or its electrical contact
is not protruded from the upper surface of tape.
Embossed Taping
"Embossed depth (T
3
) > Component thickness"
Cover Tape
Component
T3
FH10
(g) Shown in column "t" is the gap between the component pick-up and chute
surfaces.
As the gap can be adjusted by the stroke control, set the pick-up level data
in the component library data.
If dimension "t" is big, components may not stay still or may be tilted.
Be sure to adjust the dimension for the appropriate one in the range of
values specied in the table.
(h) The shape of component pick-up surface should be wide and smooth
enough to be picked up by vacuum nozzles.
(i) Cover tapes sometimes become thicker than expected due to leafy and
uffy leftovers produced through the production process.
However, the overall thickness should not exceed the value described as
"T
2
" in the table.
0908-001
OM-1606
8-9
8. Specications of Tape Feeders
8.3 Specication of 24/32 mm Tape Feeder
Model
Tape Width
×
Feed Pitch
(mm)
Types of
Tape
Standard
Set
Reel Outer
Diameter
×
Width (mm)
Chute
Height
(mm)
Referential
Components
Remarks
GT-24322
GD-24322
24 × 4 Embossed
L : f 382 × 30.4
104.0
• Barcode Label Color :
White
24 × 8 Embossed
24 × 12 Embossed
24 × 16 Embossed
24 × 20 Embossed
24 × 24 Embossed
32 × 4 Embossed
L : f 382 × 38.4
32 × 8 Embossed
32 × 12 Embossed
32 × 16 Embossed
32 × 20 Embossed
32 × 24 Embossed
TH6
Note
If a 32 mm width tape is to be used, then a tape guide and support suppressor
detachments are required.
Reference
Refer to "2.5 Tape Guide and Support Suppressor" for the tape guide and support
suppressor removal procedures.
1005-002
OM-1606
8-10
8. Specications of Tape Feeders
8.3.1 Referential Dimension for Taping
Embossed Carrier Type Taping Embossed Carrier Type Taping
Cover Tape
Taped Component
(Sprocket Hole)
Direction of Unreeling
Cover Tape
Taped Component
(Sprocket Hole)
Direction of Unreeling
Magnified
View
24 mm width FH11 32 mm width FH12
Cover Tape
Sprocket Hole
Reel
Embossed Carrier Tape
Embossed Hole
Component
Compartment
FH13
0908-001