OM-1606-006w_GT-28x.pdf - 第228页
OM-1606 1 1-7 1 1. T roubleshooting 1 1.4 Cover T ape T ake-up Action not performed Remedy : Correct the cover tape route. Incorrect cover tape route If the cover tape route is incorrect, it might cause a take-up error o…
OM-1606
11-6
11. Troubleshooting
0908-001
•
Only for tapes with 12 mm width in GT-12162 or GD-12162, 24 mm width in GT-24322 or
GD-24322, and 44 mm width in GT-44562 or GD-44562
Remedy
: Remove any chip component or foreign substance such as debris attached onto the
tape guide attachment surface and completely clean the tape guide attachment surface.
Cause : Chip component or foreign substances including debris have been
attached onto the tape guide attachment surface.
Chip component or foreign
substance such as debris
•
Only for tapes with 12 mm width in GT-12162 or GD-12162, 24 mm width in GT-24322 or
GD-24322, and 44 mm width in GT-44562 or GD-44562
Remedy
: Attach the support suppressor.
Cause : The support suppressor not attached
For tape of 12 mm width For tape of 24 mm width For tape of 44 mm width
OM-1606
11-7
11. Troubleshooting
11.4 Cover Tape Take-up Action not performed
Remedy
: Correct the cover tape route.
Incorrect cover tape route
If the cover tape route is incorrect, it might cause a take-up error or feed error.
Cause : Incorrect cover tape route on the take-up tension lever section
Notice
Remedy
: Set the cover tape correctly.
Twist
If the cover tape is set incorrectly, it might cause a take-up error or feed error.
Cause : Twisted cover tape has been set.
Notice
0908-001
OM-1606
11-8
11. Troubleshooting
0908-001
Remedy
: Detach the cover and remove any foreign substance.
Cause : Chip component or foreign substances including debris have entered
the take-up gear.
Chip component or foreign
substance such as debris