OM-1606-006w_GT-28x.pdf - 第36页

OM-1606 2-4 2. Attachment and Detachment of T ape (5) Insert the tape into the tape outlet guide. (This work is to be performed only for the dual tape feeder with 8 mm width.) Cover Tape Suppressor Peeling Section Carrie…

OM-1606

2. Attachment and Detachment of Tape

2-3

(4) Set the tape along the groove.

Tape

FB5

Notice

After removing the adhesive tape xing the cover tape, set the tape.

Note

If a 16 mm width tape in GT-12162 and GD-12162 or a 32 mm width tape

in GT-24322 and GD-24322 is to be used, then a tape guide and support

suppressor detachments are required.

Also, if a 56 mm width tape in GT-44562 and GD-44562 is to be used,

then a tape guide movement and detachments of support suppressor and

component drop preventive cover are required.

Reference

Refer to "2.5 Tape Guide and Support Suppressor" for details.

Notice

With tape feeders with joint detection units, the tape should be

passed over the joint detection sensor.

Reference

Refer to "2.6 Joint Detection Unit" for how to pass the tape

through the joint detection unit.

1005-002

OM-1606

2-4

2. Attachment and Detachment of Tape

(5) Insert the tape into the tape outlet guide.

(This work is to be performed only for the dual tape feeder with 8 mm

width.)

Cover Tape

Suppressor Peeling

Section

Carrier Tape

Tape Outlet Guide

(Only for 8 mm Width Tape Feeder)

FB6

(6) Pass the cover tape through the slit in the peeling section.

Cover Tape

Direction of Feed

Slit

Suppressor

Pass the cover tape through the slit in the peeling section

FB7

Notice

Do not forcibly pull the cover tape.

0908-001

OM-1606

2. Attachment and Detachment of Tape

2-5

•

For GT-44562, GT-72002, GD-44562, GD-72002

Normally, set the cover tape through the slit on the peeling section as shown in the

following gure.

Slit in the Peeling Section

Cover Tape

FB8

In the case that a component body or component electrode section is projecting

from the tape surface due to the taping deformation, set the cover tape through the

pick-up aperture section as shown in the following gure.

Pick-up Aperture Section

Cover Tape

FB9

1011-002