OM-1606-006w_GT-28x.pdf - 第51页

OM-1606 2. Attachment and Detachment of T ape 2-19 • Emboss Size to be provided and Feeder Size with or without the T ape Guide Model T ape Width Fixing Method Emboss Size to be Provided Feeder Size Max. Pocket Width Ma…

100%1 / 235
OM-1606
2-18
2. Attachment and Detachment of Tape
2.5 Tape Guide and Support Suppressor
2.5.1 Description of Tape Guide
For xing the tape guide, there are two ways; xing with a countersunk head
screw and with a round head screw. For each way, the applicable width and depth
of emboss pocket are different.
For using tape with
12 mm width or 24 mm width
For using tape with
12 mm width or 16 mm width or 24mm width
Fixing with a Countersunk Head Screw
(Ordinary Time)
Fixing with a Round Head Screw
(In the case that only one side
of the tape comes in contact with chute)
Movable Type
FB21
Fixing Method How to use
Countersunk Head Screw It is used when the tape width is changed.
Round Head Screw It is adjusted and used when only one side of the tape comes in
contact with the chute. (See Note).
TB1
Note
This screw is available when the pocket width is within the allowable range and
the tape width of 12 mm to 24 mm is used.
It is applicable for the tape condition where only one side of the tape comes in
contact with the chute, when the tape width is smaller than the JIS standards.
1005-002
OM-1606
2. Attachment and Detachment of Tape
2-19
•
Emboss Size to be provided and Feeder Size with or without the Tape
Guide
Model
Tape
Width
Fixing Method
Emboss Size to be
Provided
Feeder Size
Max. Pocket
Width
Max. Pocket
Depth
Tape Guide
Width
Tape Guide
Depth
GT-12162
12 mm
Countersunk
Head Screw
8.4 mm 12.1 mm 8.5 mm 14.0 mm
Round Head
Screw
8.4 mm 11.5 mm 7.7 to 8.5 mm 12.3 mm
16 mm
Round Head
Screw
11.5 mm 11.5 mm 11.6 mm 12.3 mm
Without Guide 12.3 mm 12.1 mm 12.4 mm 14.0 mm
GT-24322
24 mm
Countersunk
Head Screw
20.3 mm 16.1 mm 20.4 mm 18.7 mm
Round Head
Screw
20.3 mm 16.1 mm 19.4 to 20.4 mm 16.6 mm
32 mm
Round Head
Screw
- - - -
Without Guide 24.0 mm 16.1 mm 25.4 mm 18.7 mm
TB2
Tape Guide
Carrier Tape
Cover Tape
Sprocket
Screw
Tape Guide Width
Tape Guide Depth
Pocket Width
Pocket Depth
FB22
0908-001
OM-1606
2-20
2. Attachment and Detachment of Tape
2.5.2 Preparation before using 16 mm, 32 mm, 56 mm width tape
If a 16 mm width tape in GT-12162 and GD-12162 or a 32 mm width tape in
GT-24322 and GD-24322 is to be used, then a tape guide and support suppressor
detachments are required.
Also, if a 56 mm width tape in GT-44562 or GD-44562 is to be used, the support
suppressor and component drop preventive cover removals and tape guide
movement are required.
•
For using tape with 16 mm width
Procedure
(1) Loosen the set screw (round head screw) with a precision screw driver to
remove the support suppressor, and then attach it onto the support suppressor
housing section.
Support Suppressor
Support Suppressor
Set Screw
(Round Head Screw)
Set Screw
(Round Head Screw)
Support Suppressor
housing section
Housing
FB23
1005-002