OM-1606-006w_GT-28x.pdf - 第73页
OM-1606 3. T ape Feeder Attachment and Detachment Procedures 3-3 Feeder Size and Conditions Model No. of Feeder Bases to be mounted (pcs.) Feeder Width (mm) Max. Reel Width (mm) Pitch to be used GT -28080 GD-28080 30 20.…
OM-1606
3-2
3. Tape Feeder Attachment and Detachment Procedures
3.1 Tape Feeder Attachment Procedure
CAUTION
Do not drop the tape feeder, when attaching or
detaching.
Some tape feeder models are rather heavy.
In the case that the feeder is removed with one hand, your
hand might not be able to support the feeder weight when
it is removed from the base, which might cause a fall of
the feeder.
Falling of a tape feeder might cause an injury on your feet
or damage to the feeder.
Hold such feeder with your both hands one by one and
take care not to drop it.
Procedure
(1) Set the reel onto the reel receiving bay in the reel holding section on the bank
feeder change cart.
Reel Holding Section
FC1
0908-001
OM-1606
3. Tape Feeder Attachment and Detachment Procedures
3-3
Feeder Size and Conditions
Model
No. of Feeder
Bases to be
mounted (pcs.)
Feeder
Width
(mm)
Max. Reel Width
(mm)
Pitch to be used
GT-28080
GD-28080
30 20.2 14.4 1
GD-28081
GT-28082
GD-28082
GD-28083
GT-12162
GD-12162
30 20.2
12 mm Tape : 18.4
16 mm Tape : 22.4
12 mm Tape : 1
16 mm Tape : 2
Note (c)
GT-24322
GD-24322
15 39.0
24 mm Tape : 30.4
32 mm Tape : 38.4
2
GT-44562
GD-44562
10 61.7
44 mm Tape : 50.4
56 mm Tape : 62.4
3
GT-72002
GD-72002
7 78.2 72 mm Tape : 89.0 4
GT-88002
GD-88002
6 94.0 88 mm Tape : 105.0 5
TC1
1011-003
OM-1606
3-4
3. Tape Feeder Attachment and Detachment Procedures
Note
(a) The partition panel pitch (bay) should be 21 mm in the reel holding section
and the thickness of the partition panel should be 0.8 mm.
(b) When 2 pitches or more are used, remove the partition panel.
Notice
When removing or setting the partition panel, take care not
to hurt your ngers.
(c) Two pitches are required if the reel is set when using a 16 mm width tape,
because the max. reel width exceeds the feeder pitch (21 mm).
(d) When the dual tape feeder with 8 mm width is used, lower the reel
receiving bay lever and set two reels above and under the reel receiving bay
lever.
The combination of two large reels is not available.
Also, when a large reel is to be set, return the lever to the original position
and set it.
Reel Holding Section
Reel Receiving Bay Lever
(For Small Reel)
4 Pitch
3 Pitch
2 Pitch
1 Pitch
Reel Receiving Bay Lever
(For Large Reel)
Partition Panel
Large Reel Set Position
Small Reel Set Position
FC2
0908-001