00196932-02 SM S-Feeder Repair DE EN multilang - 第100页
4 S-Feeder Test Software 4.2 Checking of 3x8mm S-Feeder 100 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 5. The res ult is shown a t th e comment field. Please no - tice, that the software does not check the move…
4 S-Feeder Test Software
4.2 Checking of 3x8mm S-Feeder
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 99
ALT+A BE-cover
1. Start the test "BE-cover" by pressing the keys ALT+A.
You must control the movement of the feeder BE covers
visually because in this test the software only checks the
communication with the feeder. The process takes place
automatically. Each track is clocked 5 times each. There
is no need manual switching of tracks
2. The left cover is indexed
3. The middle cover is indexed
4. The right cover is indexed.
4 S-Feeder Test Software
4.2 Checking of 3x8mm S-Feeder
100 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
5. The result is shown at the comment field. Please no
-
tice, that the software does not check the movement of
the cover.
4 S-Feeder Test Software
4.2 Checking of 3x8mm S-Feeder
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 101
F2 Hand (Component cover)
F9 Single step
F11 ¼ revolution
ALT+V Version
F3 tape data
NOTICE
The functions F2 and ALT+A (BE-cover) are not avaible for 3x8 S 0201 Gold Feeder!
Switch off first the corresponding track for the execution of .F2, F9 and F11 . These test func
-
tions are used in case of repair for quick check of the respective drives.
Watch for these tests, the mechanical function of the feeder. The software only checks the com
-
munication with the feeder.
1. Select a track by pressing the key F4
2. Start the test "component cover" by pressing the key
F2
3. The result is shown at the comment field.
1. Select a track by pressing the key F4
2. Start the test "single step" by pressing the key F9. The
pin wheel is indexed individually
3. The result is shown at the comment field.
1. Select a track by pressing the key F4
2. Start the test "revolution" by pressing the key F11
3. The selected index wheel rotates ¼ to turn.
4. The result is shown in comment field
1. Press the keys ALT+ V "Version"
2. The software version is shown at the comment field.