00196932-02 SM S-Feeder Repair DE EN multilang - 第109页
6 Checking and adjusting 3x8mm, 12-88mm S-Feeder 6.4 3x8mmS: Checking cover strip removal motor, track 1, 2 & 3 current input SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 109 6.4 6 . 4 3 x 8 m m S : C h e c k…
6 Checking and adjusting 3x8mm, 12-88mm S-Feeder
6.3 3x8mmS: Checking cover strip disposal motor, direction of rotation and function
108 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
6.3
6.3 3x8mmS: Checking cover strip disposal motor, direction of rotation and function
3x8mmS: Checking cover strip disposal motor, direction of rota
-
tion and function
7. Turn on the switch 1 (see point 4) back down and put
the motor in slot 2 (white pedestal) of the extension box.
8. Now, turn on the switch 2 under "cover device" up
-
wards. Make sure that the switch 5/30V is still on 5V.
9. Check the current consumption. Setpoint is here also
30 - 55mA.
10. Check the direction of rotation of the motor. It must ro
-
tate in a clockwise direction.
11. Would you like to test the motor in continuous opera
-
tion, set the switch 5/30V to 30V on.
1. Set switches 1-3 in "Foil motor" in the lower position
and insert the cover strip disposal motor unit to the exten
-
sion box. Track 1 (red) on the connector 1, track 2 (green)
on the connector 2 and 3 track 3 (blue) on the Connector
3
2. Switch on the S-Feeder Motor Tester
6 Checking and adjusting 3x8mm, 12-88mm S-Feeder
6.4 3x8mmS: Checking cover strip removal motor, track 1, 2 & 3 current input
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 109
6.4
6.4 3x8mmS: Checking cover strip removal motor, track 1, 2 & 3 current input
3x8mmS: Checking cover strip removal motor, track 1, 2 & 3 cur
-
rent input
3. Turn the switch 1-3 upwards.
4. Check the direction of rotation of stuffing gear (in the
illustration, the lowest gear range). The gears must rotate
in the direction of the arrow.
5. With the 5/30V switch you can turn the wheels fast or
slow. The 30V setting is suitable for endurance tests
1. Set switches 1-3 in "Foil motor" in the lower position
and insert the cover strip disposal motor unit to the exten
-
sion box. Track 1 (red) on the connector 1, track 2 (green)
on the connector 2 and 3 track 3 (blue) on the Connector
3
2. Switch on the S-Feeder Motor Tester. Set the 5/30V
switch under "foil motor" up (5V). The 30V switch position
is suitable for endurance test.
6 Checking and adjusting 3x8mm, 12-88mm S-Feeder
6.4 3x8mmS: Checking cover strip removal motor, track 1, 2 & 3 current input
110 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
3. Turn the switch 1 (Track 1) upwards.
4. Read the current consumption. The setpoint is 4-8 mA.
5. Perform the test with track 2 and 3 (switches 2 and 3).
Check out that always just one track is turned on.