00196932-02 SM S-Feeder Repair DE EN multilang - 第137页

11 3x8mm S-Feeder - Worm gear drive 11.1 Removal of worm gear drive SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 137 1. Remove the M1.3 screw o n the tape channel [03048474-xx] as sh own. 1. Disconnect all dri ve…

11 3x8mm S-Feeder - Worm gear drive

11.1 Removal of worm gear drive

136 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur

Removal of Control Board Cover [00345351-xx]

Removal of Control Board [00345355Sxx]

Removal of Drive complete [00343996Sxx]

1. Remove the four countersunk screws on the cover

plate.

1. Remove both M5 screws.

1. Remove both screws on the side plate, as shown.

11 3x8mm S-Feeder - Worm gear drive

11.1 Removal of worm gear drive

SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 137

1. Remove the M1.3 screw on the tape channel

[03048474-xx] as shown.

1. Disconnect all drive motor and lifting magnet connec

tors (qty : 4) from the distributor board

[00345354Sxx].

1. Remove four M2.5 screws at the lower side as

shown.

11 3x8mm S-Feeder - Worm gear drive

11.1 Removal of worm gear drive

138 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur

Removal of Tape Channel top [00344007-xx]

▪ Remove 4 screws from sequence 1 to 4

1. Remove both screws from front protective plate

[00345830-xx].

1. Remove 4 screws from the bearing support wall

[00344019-xx].

2. Next, remove retaining screw for tape channel top

complete.

3. Lift the tape channel top upwards.