00196932-02 SM S-Feeder Repair DE EN multilang - 第89页
4 S-Feeder Test Software 4.1 Checking of 2x8mm S-Feeder SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 89 F6 Cover strip 1. Start the test " cover strip" by pressing the key F6 Move the rocker of the a ct…
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
88 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
software workflow (2x8mm S feeder)
F5 Control panel
1. The left track is in the main menu after starting allways
enabled. Start the test "control panel" via the button F5
After step 1, both LED´s are off.
After step 2 flash the LED by the active track.
After step 3 flash both LED´s.
2. Press on the feeder the green touch key for the left
track . (Tape Index Feed)
3. Press on the feeder the yellow touch key for the left
track. (Foil Feed)
4. The results is shown in the comment field..
5. Switch over by pressing the key F4 on the right Track
and repeat steps 1 to 4 with the control panel on the right
Track
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 89
F6 Cover strip
1. Start the test "cover strip" by pressing the key F6
Move the rocker of the activated foil removal till the motor
stops. Run this movements for 3 times. The picture dis
-
play the rocker in the right track
2. On the feeder, move the swinging bracket of the left
track 3x manually.
3. The result is shown at the comment field.
4. Press F4 to the right Track and repeat the steps 1 to 3 ..
4 S-Feeder Test Software
4.1 Checking of 2x8mm S-Feeder
90 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur
F7. Hand (Component cover)
1. Start the test with "component cover" with the key F7.
The "component cover" (BE-cover) opens and closes 10
times. You can delay the process or stop by pressing the
green and then yellow button. .
2. Please Note during the test the software only checks
the communication with the selected Track.
3. The result is shown at the comment field.