00196932-02 SM S-Feeder Repair DE EN multilang - 第95页

4 S-Feeder Test Software 4.2 Checking of 3x8mm S-Feeder SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 95 software workflow (3x8mmS feeder) F5 Control panel 1. T he le ft tr ack is in the ma i n m e n u a f t e r s…

4 S-Feeder Test Software

4.2 Checking of 3x8mm S-Feeder

94 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur

4.2

4.2 Checking of 3x8mm S-Feeder

Checking of 3x8mm S-Feeder

Starting the software (3x8mm S-Feeder)

1. Ensure power supply is turned off before connecting

any cables. (then no need for switch off as written in no 3)

2. Connect the feeder to the motor testbox.

3. Switch off the power supply and the motor testbox .

4. Connect the RS 232 cable to the PC through the

COM1 and start the test software. Switch on Power sup

ply and the motor test box

NOTICE

The application flow is described on the basis of the testing software for the 3x8mmS Gold-

Feeder (0201). The application flow for the 3x8mmS Feeder is not very different regarding the

user interface.

The functions F2 and ALT + A (BE-cover) are for the S 3x8mm Gold Feeder not available!

For the operation can be used the function keys on the PC keyboard, as well as the correspond

ing buttons of the user interface!

For the test functions F5 - F8 and for ALT+A is not necessary a manual switch over!

4 S-Feeder Test Software

4.2 Checking of 3x8mm S-Feeder

SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur 95

software workflow (3x8mmS feeder)

F5 Control panel

1. The left track is in the main menu after starting allways

enabled. Start the test "Operating panel" with the key F5.

2. Press the green touch key on the feeder. (Tape Index)

With this test will be tested the function of the 3 touch

key´s on the feeder - operator panel. The test is inde

pendent of the selected track.

3.Press the yellow touch key on the feeder (foil detail)

4. Press the blue foil taste on the feeder (track switch

over).

5. The Result is shown in the Comment field. The Test is

independent for each Track therefore repeat to complete

all

4 S-Feeder Test Software

4.2 Checking of 3x8mm S-Feeder

96 SIPLACE S-Feeder Repair SIPLACE S-Förderer Reparatur

F6 Display

1. Start the test "Display" with the key F6.

2. Please check the display. All 7 segments on the 3 lo

cations and points need respectively flashing right on the

bottom.

3. Press the blue key on the feeder when all signals flash

correctly

4. The Result is shown in the Comment field.