00196283_Install_WinXP_unattended_CD - 第11页
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE Installationsanleitung für Windows XP (unattended setup) CD V3.0 11 4 Hot fixes The hotfixes for Windows XP Service Pack 3 have b een removed fr…
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
10
SIMATIC Box PC 627 J SIPLACE HS-D / X-Series
with Board a5e00329102
ESPRIMO E 5700 J SIPLACE F5 HM / S-20 / S-23 / S-25HM / S-27HM / F4 / F5
with Board D2334
ESPRIMO P 5700 J SIPLACE HS-60 / HS 50/ 50+
with Board D2331
ESPRIMO C 5910 J SIPLACE Compact
with Board D2364
ESPRIMO E 5915 J SIPLACE F5 HM / S-20 / S-23 / S-25HM / S-27HM / F4 / F5
with Board D2344
ESPRIMO P 5915 J SIPLACE HS-60 / HS 50/ 50+
with Board D2312
ESPRIMO E 5925 J SIPLACE F5 HM / S-20 / S-23 / S-25HM / S-27HM / F4 / F5
with Board D2598
3.2 Required configuration parameters
For the installation procedure, please note the following information:
• 1
User Name
• 2
Company Name
• 3
IP address of the station computer (Default: 172.22.100.100)
• 4
IP address of the programming system (Default: 172.22.100.102)
• 5
IP address of the default gateways (Optional, if no Remote Support was installedÆ no entry.
Default: no entry)
• 6
Subnet mask of the local IP network
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
11
4 Hotfixes
The hotfixes for Windows XP Service Pack 3 have been removed from the installation CD-ROM.
Apply hotfixes from the latest delivered Windows XP SP 3 Hotfix-CD.
Installation Manual for Windows XP (unattended setup) CD V3.0 02/2011 US+DE
Installationsanleitung für Windows XP (unattended setup) CD V3.0
12
5 Installation
Note:
In the general part of the setup, you have to answer with “Yes” or “No”. In the second part you
can switch between the wizard dialogs with “Next” or “Back” buttons.
With the “Cancel” button you can abort the whole installation procedure.
5.1 Hardware specific requirements and restrictions
5.1.1 SCENIC C 610
If you connect your keyboard via USB interface, you have to ensure the “legacy USB” option in the System
BIOS to be enabled. To do this:
→ Press the F2 key at boot time.
→ Navigate to the “Advanced” menu.
The following settings are displayed:
Advanced
Peripheral Configuration
---------------------------------------------
---
Serial 1: [Enabled]
Serial 1 Address: [3F8h, IRQ 4]
Serial 2: [Enabled]
Serial 1 Address: [2F8h, IRQ 3]
Parallel: [Enabled]
Parallel Mode: [Printer]
Parallel Address: [378h, IRQ 7]
USB Host Controller: [Enabled]
USB 2.0 Host Controller: [Enabled]
USB Legacy Support: [Disabled]
Serial ATA Configuration
Diskette Controller: [Enabled]
Mouse Controller: [Enabled]
LAN Controller: [Enabled]
LAN Remote Boot: [Disabled]
Audio Controller: [Disabled]
Item Specific Help
------------------------------
-----
F1 Info
→ To activate the option “USB Legacy Support”, navigate to it and press the space bar.
→ After that you have to exit the BIOS setup and save your changes.