Besi JTF2 Traystak Feeder - 第40页

Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLAC E S-25 HM / S-27 HM / HS-50 / HS-60 / HF -series / X-series 11/2006 Edition 40 : Use the two outer screws to adjust the adapter so that it lies flat on the t able…

100%1 / 60
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
39
: Screw the adapter in place with the M10 x 60 mm screw..
2
2
2.7.3 With clamp, without hole
The clamp does not work on the HF-series / X-series. 2
: Unplug the table and dock it out of the placement machine.
: Loosen the screws on the front of the adapter.
: Position the adapter at the desired position (which must fit with the SIPLACE tape guide chan-
nel special design).
2
2
2
2
2
2
2
2
Screw
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
40
: Use the two outer screws to adjust the adapter so that it lies flat on the table's magnetic rail.
They are provided to prevent the magnetic rail being damaged when you tighten the screws
on the adapter.
2
: Fix the adapter using the 3 screws on the front panel of the adapter so that it is seated firmly
on the table.
2
With gap: WRONG!!!
Without gap: RIGHT!!!
3 screws
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
41
2.7.4 Fitting the Traystak feeder
: Fit the Traystak feeder on the adapter using the 4 screws.
2
Make sure that the pins guide the Traystak feeder into the correct position. 2
2
2
2
2
2
2
2
2
2
4 screws