Besi JTF2 Traystak Feeder - 第53页
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series 11/2006 Edition 53 : Fit the new tape gu ide channel together with the cover plate (lef t screw). T ight…
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
52
: Remove the cover plate for the ODU connector by loosening the two screws. The cover plate
can be removed with a light rotary movement forward.
2
: Remove the tape guide channel by loosening these two screws.
2
Inside the machine, the cover plate must be pulled inwards slightly so that the tape guide channel
can be removed. 2
2
Screws
Screws
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
53
: Fit the new tape guide channel together with the cover plate (left screw).
Tighten it with both screws left and right.
If necessary, tighten the cover plate on the right side with M5x8 screw.
2
2
2
2
2
2
2
2
2
2
2
2
2
Screws
Cover plate
M5x8 screw
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
54
: Insert the standard bar with some modified cover plate for the ODU connector. Do not screw it.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Bar
Cover plate