西门子SIPLACE HS 60-设备参数_EN - 第17页

15 Component Supply: Tape Feeder Technical Data Packaging Model Feeder locations Transport distance Max. Height of component Paper and blister tapes 2 x 8 mm S a 3 x 8 mm S 3 x 8 mm S b 12/16 mm S 1 1 1 1 2 or 4 mm 2 or …

Component Supply:

Changeover Table

Technical Data

Component feeder tables

(exchangeable)

4 tables per machine

compatible only with SIPLACE HS-60

Feeder location 12 feeders 3 x 8 mm per table =

144 tracks of 8 mm per machine

Feeder modules SIPLACE tape and bulk feeders

Accessories Tape container, waste container,

Description

SIPLACE HS-60 is equipped with

four stationary component tables,

one for each placement head.

With these four tables SIPLACE

HS-60 can accommodate a total of

144 different 8 mm part numbers.

On the changeover tables tape

feeders and Bulk Case feeders

can be positioned. For safety rea-

sons tracks not in use should be

equipped with guards for feeder

locations.

Component feeders are stationary

during the placement process.

This allows for the replenishment

of both tape and bulk components

during machine operation.

For the changeover, individual

feeders or entire changeover ta-

bles can be exchanged without

the use of tools or external lifts.

Job changeover times can be

dramatically reduced with the use

of additional feeder tables. This

will allow large set-ups to be com-

pleted off line without impacting

machine production time

Using component bar codes with

the optional Component Bar Code

Scanner guarantees the correct al-

location of component to track.

Changeover tables are equipped

with rollers and an integrated

pneumatic lifting device which

eliminates the need of an external

lifting cart as with other equip-

ment. Exchanging the tables takes

less than 2 minutes per module.

Mobile

Changeover

Table

Splicing Too

Exchange of a Component Changeover Table

Component Supply:

Tape Feeder

Technical Data

Packaging Model Feeder

locations

Transport

distance

Max. Height

of component

Paper and

blister tapes

2 x 8 mm S

3 x 8 mm S

12/16 mm S

2 or 4 mm

2 mm

4 - 12 mm

2.5 mm

0.7 mm

14 mm

Blister tape 24/32 mm S 1.5 4 - 32 mm

14 mm

Tape reels Ø 7" to 19" (178 - 470 mm)

a) Fiducial for recognition of position of feeders;

b) only for 0201 and 0402;

c) adjustable in increments of 4 mm.

Description

The tape reels of the feeder mod-

ules are accommodated in the

tape container of the component

changeover table. A cutter auto-

matically chops up empty tape

when it comes out.

Feeder modules used on SIPLACE

are distinguished by a short cycle

time and a highly accurate pick-up

position. The feeder pitch is easily

adjustable. Thanks to the general

purpose tape feeder modules

which are equally suitable for pa-

per and blister tapes, a small range

of module types is sufficient. This

is a decisive advantage for in-

vestment and logistics. Once acti-

vated by a signal from the compo-

nent table, the modules control

the entire feeder operation of the

automatic strip removal all by

themselves.

3 x 8 mm S

The feeders series feature very

short cycle times and they can

handle tapes with 2 mm grids

(8 mm S). 8 mm S and

12 / 16 mm S are equipped

with component cover.

2 x 8 mm S

12 / 16 mm S

24 / 32 mm S

Tape Feeder Modules S

Component Supply:

Bulk Case Feeder

Technical Data

Bulk Case feeder

Packaging form

Bulk Case

Feed rails for: Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different compo-

nent types

a) Reference mark to recognize the position of feeder.

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

components packaged in standard

bulk containers. It transports rec-

tangular and cylindrical passive

components to the pick up area of

the machine. To replenish the sup-

ply, the Bulk Cases are removed

and replaced outside the machine

eliminating stoppages for replen-

ishment.

Essentially, this feeder module

consists of a base which holds 2

feeder rails. The components are

separated and transported through

the feeder rail via compressed air.

The principle of stationary compo-

nent tables has been tried and

tested specifically with Bulk Case

components. Vibrations, which

developed when other placement

methods are used may cause

wear to the components compro-

mising quality and reliability of the

components.

Bulk Case Feeder