西门子SIPLACE HS 60-设备参数_EN - 第37页
35 Possible Machine Configuration Shunting Radius for Changeover Tables 1.20 m Right Side 1 and 2 PCB Transport Direction Left Side 1 and 2 Nozzle Changer 5 Magazines with 12 Nozzle positions each Changeover Table with 1…
34
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2560 mm
2380 mm
1495 mm
Description
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE
HS-60 placement machine. Forks
2.5 m long are required for a
packed machine, 2 m for an un-
packed one.
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor characteristics on request)
Total weight of equipped machine 3.5 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine leg-
s
a
)
11.25 kg/cm
2
a) Worst case scenario; 6 legs per machine installed, area per leg: 104 cm
2
.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE
HS-60, make certain that the
surface it is placed on possesses
the required load bearing capacity.
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
Footprints
PCB Transport Direction
Dimension of
Transport Box
X
Monitor
Keyboard
Warning lamp
Component changeover tables.
696
(0, 0)
Y
487
388
All Units in mm
Center of Gravity of SIPLACE HS-60
35
Possible Machine Configuration
Shunting Radius for
Changeover Tables
1.20 m
Right Side 1 and 2
PCB Transport Direction
Left Side 1 and 2
Nozzle Changer
5 Magazines with
12 Nozzle positions each
Changeover Table with
12 Feeder Places
e.g. for Tapes, Bulk
12-Nozzle Collect & Place
Head
5-Section Dual Conveyor with
Automatic Width Adjustment from
50 x 50 mm
2
to 368 x 216 mm
2
(2" x 2" to 14.5" x 8.5")
Headcrash
Protection
PCB Transport Direction
36