西门子SIPLACE HS 60-设备参数_EN - 第4页
2 Technical Data 30 Signal Interfaces Connections Dimensions and Set-Up Conditions Transporting and Commissioning Possible Machine Configuration 35 Very High Speed SMD Placement System SIPLACE HS-60 SIPLACE HS-60
1
Very High Speed SMD Placement System
SIPLACE HS-60
Subject to change
without notice.
Edition 2
0604-HS60-e
Order No
A10002-P141-T2-X-7600
Machine Description 3
Line Design 5
Placement Heads 6
Placement Accuracy
Component Range
12-Nozzle Collect & Place Head for Very High Speed
Component Placement
Nozzle Changer for 12-Nozzle Collect & Place Head (Option)
PCB Conveyor 10
Single Conveyor
Dual Conveyor
Ceramic Substrate Centering (Option)
PCB Bar Code for Production-Controlled Manufacturing (Option)
Component Supply 14
Changeover Table
Tape Feeder
Bulk Case Feeder
Guard for Feeder Locations
Component Bar Code Scanner for Set-Up and
Refill Check (Option)
SIPLACE External Set-Up Station (Option)
Vision Sensor Technology 20
PCB Vision Module
PCB Position Recognition
Bad Board Recognition
Position Recognition of Feeder
Multicolor PCB Camera (Option)
Algorithms to Determine the X-/Y-Position and the
Placement Angle
Standard Component Vision Modules for 12-Nozzle
Collect & Place Head
DCA-Vision Module for 12-Nozzle Collect & Place Head (Option)
Machine Criteria 26
Placement Accuracy
Placement Reliability
Mapping (Option)
SIPLACE Software Architecture 29
Line Programming System
Station Computer
3
Machine Description
Technical Data
Type of placement head 12-Nozzle Collect & Place Head
Number of gantries 4
Benchmark placement rate
a
60,000 cph
Component Range 0.6 x 0.3 mm
2
(0201) to 18.7 x 18.7 mm
2
Max. placement accuracy (at 4 σ)
a
80/75 µm
PCB dimensions (L x W)
Single conveyor
Dual conveyor
Dual conveyor in
single conveyor mode
50 x 50 mm
2
to 368 x 460 mm
2
/
2" x 2" to 14.5" x 18";
LBO
b
: 50 x 110 mm
2
to 610 x 460 mm
2
,
width up to 508 mm on request.
50 x 50 mm
2
to 368 x 216 mm
2
/
2" x 2" to 14.5" x 8.5";
LBO
b
: 50 x 110 mm
2
to 610 x 216 mm
2
,
width up to 242 mm on request.
50 x 50 mm
2
to 368 x 380 mm
2
/
2" x 2" to 14.5" x 15";
LBO
b
: 50 x 110 mm
2
to 610 x 380 mm
2
,
width up to 430 mm on request.
Feeding capacity 144 tracks, 8 mm tape
Component table Quick changeover table with integrated
wheels, reel holder and scrap bin
Types of Feeder modules Tapes, Bulk Cases, Surf Tape feeders,
application-specific OEM feeders
Operating system Microsoft Windows / RMOS
Power 4 kW
Compr. air requirements 6.5 - 10 bar, 950 Nl/min, tube ¾"
Vacuum pump (Option) 6 - 10 bar, 400 Nl/min, tube ¾"
a) As defined in Scope of Service and Delivery SIPLACE.
b) Long Board Option.
Description
The SIPLACE HS-60 SMD place-
ment system combines very high
placement speed with both accu-
racy and flexibility.
SIPLACE HS-60 machines are
equipped with four X-Y-main gan-
tries. Each gantry features a star-
shaped
12-Nozzle Collect & Place Head. The
placement heads alternately pick up
components from a stationary feeder
bank and place these components
on the stationary PCB.
Due to the efficient heads as well as
the high acceleration the benchmark
placement rate of 60,000 cph of the
SIPLACE HS-60 is uncompared.
The SIPLACE HS-60 funds upon the
modular SIPLACE platform and thus
shows distinct advantages:
Component tapes of all sizes
can be replenished by splicing a
new reel of components to the
end of a depleting reel. This eli-
minates machine stoppage due
to component replenishment.
Stationary, vibration-free feed-
ers ensure a reliable pick-up of
even the smallest components
(e.g., 0201 chips).
Thanks to the Collect & Place
principle the path can be mini-
mized and the sequence of
placement optimally adjusted.
With the linear drive SIPLACE
HS-60 reaches an impressive
placement accuracy and lowest
dpm rates.
Speed coupled with economic ef-
ficiency and set-up reliability is the
SIPLACE HS-60´s recipe for suc-
cess. Components are pre-picked
as the PCB is transported into the
placement area. The placement
sequence is optimized for speed:
While one Collect & Place Head is
placing components, the second
head is picking up the next series
of components to be placed.
Among others, the following
options are available for the
SIPLACE HS-60:
Additional changeover tables
enables the reduction of job
set-up time increasing machine
utilisation.
Dual Conveyor eliminates the
non-productive PCB loading
times thus increasing machines
operating efficiency.