00196642-01 - AI BE-Kamera 38 CPP_de_en.pdf - 第19页

Assembly Instruction 6 Assembly Edition 09/2009 19 6.2 Dismantling the Placement Head 6 Fig. 6.2.1 Dismantling the placement head - view from the right and the left 1 to 4 : Fixture holes (two each, depends on installati…

100%1 / 26
6 Assembly Assembly Instruction SIPLACE X Series
Edition 09/2009
18
5.2 Scope of Delivery
– Component camera, type 38 for CPP head [00119783-xx]
5.3 Required Tools
– Torx screwdriver [03078400-xx]
– Extension/straight TX20 [03073256-xx]
– Bit holder for Torque Vario-S screwdriver [03078706-xx]
6 Assembly
6.1 Preparatory Work
X Complete all placement operations at the machine.
X Shut down the Windows operating system properly, since otherwise problems during a restart
or data loss may occur.
X Switch the machine off at the main switch.
X Disconnect the machine from the power supply system.
X Secure the machine to prevent reactivation and indicate that service work is being carried out.
Assembly Instruction 6 Assembly
Edition 09/2009
19
6.2 Dismantling the Placement Head
6
Fig. 6.2.1 Dismantling the placement head - view from the right and the left
1 to 4: Fixture holes (two each, depends on installation height).
5: Component camera
X Disconnect the pneumatic connection from the placement head.
X Disconnect the flat ribbon cable from the placement head (intermediate distributor).
X Loosen the screws fastening the strain relief on the component camera cable and carefully
unplug the cable. While unplugging the cable, press the clamps on both sides of the
connector.
X Loosen all four fastening screws with a long Torx screwdriver.
NOTE:
For further information on exchanging the placement head please refer to the Service
Manual of the relevant machine.
CAUTION: Take great care when dismantling the placement head!!
The component sensor prisms, underneath the placement head, could be damaged.
X Never place the CPP head down on the component sensor.
6 Assembly Assembly Instruction SIPLACE X Series
Edition 09/2009
20
X Carefully lift the head out of the locating pins on the head plate.
X If the head mount [03056231-xx] is at hand, fix the placement head onto the head mount.
6.3 Exchanging the Component Camera
6
Fig. 6.3.1 Removing the component camera - fixation at the CPP head
X Remove the four fastening screws (items 1 to 4) of the component camera.