00198015-01_IM_SQL_Server_2014_Express_EN - 第26页
SQL Server 2014 Ex press / Installation Manual 11/2015 Edition 26 ► Expand Microsoft SQL Server 2014 . ► Expand Configurati on Tools . ► Click SQL Ser ver 2014 Configuration M anager . Figure 5-2: Selecting SQL Server 20…
SQL Server 2014 Express / Installation Manual 11/2015 Edition
25
5 After Installation
This chapter describes how to perform some additionally required and optional settings after the
SQL installation and how to define settings you missed to set during the installation.
5.1 Additionally Required Settings
5.1.1 TCP/IP Network Protocol Enabled
After installation, you have to verify that the TCP/IP network protocol is enabled for communication.
► Click the Start/Windows button.
► Expand the All Programs or Programs group respectively – depending on your operating
system.
Figure 5-1: Expanding "All Programs" group in Windows 7
SQL Server 2014 Express / Installation Manual 11/2015 Edition
26
► Expand Microsoft SQL Server 2014.
► Expand Configuration Tools.
► Click SQL Server 2014 Configuration Manager.
Figure 5-2: Selecting SQL Server 2014 Configuration Manager
► Accept any possibly appearing User Account Control message by clicking its Yes button.
SQL Server 2014 Express / Installation Manual 11/2015 Edition
27
The SQL Server Configuration Manager is displayed.
► On the left side, expand each group and select each Protocols entry.
► Ensure that TCP/IP is Enabled. If you need to change the setting to Enabled, right- click the
entry and select Enable.
The whole procedure is displayed in the following figures.
Figure 5-3: Enabling TCP/IP – verifying Client Protocols for 32-bit interface
Figure 5-4: Enabling TCP/IP – changing setting for "Protocols for SIPLACE_2014EX"
Figure 5-5: Accepting warning message after changing setting