nozzle - 第11页
1 – 11 Y X Y X Y X Y X I n t ro du ct io n Rule 3: The side with th e most pins is at the bot tom. Rule 4: If the component has any unusual features, such as a wider pin, this feature is at the bot tom. Rule 1 has the hi…
1 – 10
1 2 3 4
Y
X
Y
X
Y
X
X
21
Y
X
Y
X
Y
X
Y
X
+
+
1 2 3 4
Y
X
Y
X
Y
X
X
1 2 3 4
Y
X
Y
X
Y
X
X
Y
The x-axis of the component does not necessarily have to be its long side. This may be the case,
for example, when the nozzle has to be at 90° to the component‘s long side because of holes
through the component (see figure: no. f nozzle = ).
Rule 2: Pin 1 is in the lower left corner or in the center of the component‘s left side.
In the case of diodes, the anode (+) must point in the positive x-direction.
1 – 11
Y
X
Y
X
Y
X
Y
X
Introduction
Rule 3: The side with the most pins is at the bottom.
Rule 4: If the component has any unusual features, such as a wider pin,
this feature is at the bottom.
Rule 1 has the highest priority, followed by rules 2, 3 and 4 in that order.
The sample components at the beginning of each chapter are
shown in accordance with the four rules.
The marking on the example (shown beside) indicates the
lower left corner of the component.
1 – 12
Overview of
Standard Nozzles
Standard Nozzles of the 5xx Nozzle Series
516
Item No. 03012036-01
519
Item No. 03012034-01
517
Item No. 03012042-01
518
Item No. 03012011-01
Nozzle adapter
Item No. 03011583-02