3_AVS-V2_MCT-UM-internal_EN_07-2019 - 第17页

ASM AVS - U SER M ANUAL P AGE 17 OF 182 Onc e t he t ray car rier is p lace d o n the ta ble, the tra y can be plac ed. For sec urit y, the T ray can b e f ixe d on the back side with t he pa rt: 0306 7242 - 01 P ro tect…

100%1 / 182
ASM AVS - USER MANUAL
PAGE 16 OF 182
2.1.3.3 Trays for glass components:
There are two Trays with glass components in the standard accessories box.
• 03063444-01 Complete tray with 60 GC-AC-01
• 03063449-01 Complete tray with 40 GC-AC-02
For spare parts, see documentation Checklist AVS.
The form of the tray allows you, either to place the tray onto a tray holder (see 2.1.3.5 Tray
holder), or to place it into the conveyor of the SIPLACE machine like a PCB. Therefore see ad-
ditional instructions under 2.1.3.6 Tray in the PCB conveyor.
2.1.3.4 Adapters for tray on the WPC / MTC
To use a Tray on a WPC/MTC an additional adapter is needed to be able to align the tray on
the tray carrier plate. These adapters are always with the Tray and have to be removed from
it, if using the tray on another tray carrier (2.1.3.5 Tray holder) or in the conveyor (2.1.3.6).
• 03069672-01 „Adapter long ACT Tray on WPW/MTC“
• 03069673-01 „Adapter short ACT Tray on WPW/MTC“
2.1.3.5 Tray holder
There are two tray carriers in the standard accessories box. These are to place the Trays (see
2.1.3.3 Trays for glass components:) on the tables of the Siplace.
• 03059291-01 „Tray holder X“
• 03059289-01 „Tray holder S“
2.1.3.5.1 03059291-01 „Tray holder X“
This tray holder is to use in X-Machines with X-tables.
The design of the tray carrier follows the concept of an X-Feeder.
and has to be set up in the same way like standard X-Feeders.
Place on Track 22
ASM AVS - USER MANUAL
PAGE 17 OF 182
Once the tray carrier is placed on the table, the tray can be placed.
For security, the Tray can be fixed on the backside with the part:
03067242-01 Protection block
Move the tray holder forward
to the front end of the table,
until the pin on the front side of
the carrier moves into the X-
FCU hole.
Set the tray onto the carrier
(centered) and move it onto the
two pins of the carriers T-part.
To fix the tray with the 03067242-01 „safety
block“, you can use the 03031104-01 „DIN
464 M4 x 16 units (knurled-head bolts)“,
which you get from the tray’s cover.
ASM AVS - USER MANUAL
PAGE 18 OF 182
2.1.3.5.2 03059289-01 „Tray holder S“
This tray holder can be used in all Siplace machines with S-tables.
The design of the tray carrier follows the concept of an S-Feeder.
The tray has to be mounted in the same way, as described for the X-tray carrier above
2.1.3.5.1 03059291-01 „Tray holder X“.
NOTICE
2TReaching the Tray positions
Using it on X-, D-and HF- machines, it has to be set up on Track 37. This is necessary because of the reduced
travel range of X-, D-and HF- machines. For all other machines it can be set up as described in Siplace Pro.
2.1.3.6 Tray in the PCB conveyor
The trays for the glass components are, from the external dimensions, constructed in that
way, that the can moved into a conveyor like a glass board.
This has two advantages:
• All components can be placed without interruption. In case of a setup on a table, only a
few rows can be picked up, due to bad accessibility.
• The setup from the customer must not be changed.
A safe process is only valid from Station Software 708.xx and SIPLACE Pro 12.x upwards!
From SIPLACE Pro 12.x the following is possible:
1. Selection of a tray carrier „Conveyor Tray“ for the setup.
2. Fiducial recognition on trays (also from SIPLACE Pro 11.x on).
GEFAHR / DANGER
2T!!! Danger of Head Crash when using on older software versions !!!
Supporting the components on the conveyor track, board descriptions must be set to synchronous mode
and be equipped with Inkspots.
The detection of the ink spots ensures that components are only picked up when the plates are actually
present (=> no optimistic pre-pick).
On dual conveyors the synchronous description assures, that the plate (actually the tray) has arrived in the
assembly area before beginning the placement process (ink spot recognition).