3_AVS-V2_MCT-UM-internal_EN_07-2019 - 第22页

ASM AVS - U SER M ANUAL P AGE 22 OF 182 • Then select the co mponent you want to feed in the tray. For determinin g the positio n of the tray in the c o nveyor, the t wo Position on Conveyo r and Lane parameters ha v e t…

100%1 / 182
ASM AVS - USER MANUAL
PAGE 21 OF 182
Feeding in single conveyor
In machines with dual conveyor, the glass plate can be fed in one lane and the tray in the other
lane.
• Connect the tray with the glass plate, as described above in the section 2.1.3.6.1.
• Set the conveyor width to 428.00 mm, or use the automatic conveyor with adjustment.
The Tray is going to be moved into the machine, together with the glass plate.
SIPLACE Pro – Setup (tables)
• In SIPLACE Pro, take the tray carrier Coveyor Carrier X, from the My Tray Feeder Types di-
rectory and set it on the table on the gantry that you want to measure.
• Select the tray carrier so that it is displayed in the editor screen below.
• Click on the button in the field of the Tray column and, e.g. select the tray Conveyor Tray
GCAC02 from the folder My Tables => Siplace_AVS\Original data (save)\Trays for X-Series
Machines\X-Feeder docking unit\GC-AC-02\.
• Or, drag and drop a table which is already prepared, from the folder My Tables =>
Siplace_AVS\Original data (save)\Tables for X-Series Machines\Conveyor Tray from 708, di-
rectly to the Location in the setup, beside your conveyor lane, where you like to present
your Tray.
• Pull the tray carrier Coveyor Carri-
er X, from the My Tray Feeder
Types directory, to a free trck on
the table.
ASM AVS - USER MANUAL
PAGE 22 OF 182
• Then select the component you want to feed in the tray.
For determining the position of the tray in the conveyor, the two Position on Conveyor and
Lane parameters have to be considered.
ASM AVS - USER MANUAL
PAGE 23 OF 182
Position on the conveyor
This parameter is required for the single conveyor mode.
Conveyor lane
This parameter is required for the dual conveyor mode.
Left lane (2)
Right lane (1)
Tot he left of the board
To the right oft he board
Behind the board
In front of the board
NOTICE
2TPick up positions
You do not have to enter any offset values.
By using the Conveyor Carrier X tray carrier, the pickup position is automatically specified by the board
reference corner in the machine.