3_AVS-V2_MCT-UM-internal_EN_07-2019 - 第39页
ASM AVS - U SER M ANUAL P AGE 39 OF 182 Tables for MCT: The folder “ AVS\ MCT Original Da ta ” contains table d escriptions as well, to mak e it more e as y to fi- nally configure the se t up. There is one fold er with e…
ASM AVS - USER MANUAL
PAGE 38 OF 182
4.4 Overview of AVS SIPLACE Pro Data
The Home folder is ..MyBoards\AVS\..
There you find data for Force Measurement (FORCE) and MCT (MCT Original Data).
Boards for MCT:
The folder “AVS\MCT Original Data” contains board descriptions for Standard MCT and Special
Boards. Descriptions for so called “Quadlane conveyors” should be no longer necessary.
The folder for “Standard MCT” has sub folders for the different Head-Types (regarding number of
nozzles on the head).
For head types, where you must use glass components from a tray, besides normal description,
board descriptions for the use of “Tray in Conveyor” is available.
Remember this only means the “Tray in Conveyor” function with single conveyor, because for
double conveyor you can use the normal board description.
ASM AVS - USER MANUAL
PAGE 39 OF 182
Tables for MCT:
The folder “AVS\MCT Original Data” contains table descriptions as well, to make it more easy to fi-
nally configure the setup.
There is one folder with empty tables to clean up a setup copied from the customers line configu-
ration.
The structure for Tables is like follows:
Tables for machine types => Component Types =>
Then, in case of glass components in tray, the descriptions are sorted in “Tray on Table” and “Tray
on Tray Feeder”.
In case of machine types with Software 708.x and higher, there is also a folder for Tray in Conveyor
descriptions.
ASM AVS - USER MANUAL
PAGE 40 OF 182
5 Software
5.1 General (Preface)
The Installation of the Software is described in „2_AVS-V2_Software Installation_Edition_….“.
The ASM AVS device software primarily consists of 2 parts:
• Part 1 (administration, referred to as the »ASM AVS Software« below):
Here, all the necessary data relating to machines, customers, contacts, measurement- plans
(recipes) and projects is managed in a database.
• Part 2 (measuring/analysis, referred to as the Software »AVS_Scan« below):
This is responsible for performing and analyzing measurements on the basis of the data
passed by the first part. It includes axis control, image acquisition using SIPLACE Vision and
also makes it possible to analyze the measured data and create reports.
The »ASM AVS Software« (Part 1) provides the user of the ASM AVS a database that always
contains the following data:
• Customer data (accounts)
• Data for contacts at the customer (contacts)
• Machine data (serial numbers and configurations)
• Specifications (depending on machine configuration)
• And data required for organizing the recipes (measurement plans) and the measurement pro-
jects…
5.1.1 Starting the »ASM AVS Software«
To start the "ASM AVS Software", click this
icon on the desktop or use the Start menu:
The software in general consists of 2 parts, as already described in 5.1.