Service Manual SIPLACE SmartFeeder - 第16页
2 General 2.5 Creating new labels for feeder modules 16 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 6. Enter the feeder module Part No . Enter the feeder module Feeder I…
2 General
2.5 Creating new labels for feeder modules
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 15
2.5 Creating new labels for feeder modules
If you need replacement labels for your feeder modules, you can create these online, at the
SIPLACE website. Simply enter the serial number and the feeder ID of the SIPLACE feeder mod-
ule and the SIPLACE Feeder Label Tool will generate a new label for you to download.
► Start your internet browser.
1. Enter the URL www.asm-smt.com in the address line.
2. In the dropdown menu on the right of the header bar, select the website language: German,
English
or Chinese.
3. In the website menu bar, hover of MyASM with the mouse.
The MyASM menu will open.
4. Click on Feeder Label Tool.
5. Click on the Feeder Label Tool button.
2 General
2.5 Creating new labels for feeder modules
16 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
6. Enter the feeder module Part No.
Enter the feeder module Feeder ID.
Select whether it is a Single Track Feeder or a Multi Track Feeder.
Click on the Generate button.
The label for your feeder module will be generated for downloading.
3 X-Feeder Test Station
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 17
3 X-Feeder Test Station
The X Feeder Test Station [03076685-xx],consists of an X Feeder Testbox and a Single Slot EDIF
(SSE) with base plate, on which the relevant X feeder modules are placed for checking. The SSE is
connected to the X Feeder Testbox
via a CAN cable and is supplied with power via a power pack.
The X Feeder Testbox can be used to test the following feeder modules:
●
X Feeder 4-88mm
●
SmartFeeder 2x8mmX
●
SmartFeeder 4-16mmX
The X Feeder Testbox has the following functions:
●
Checking the feeder module (test)
With the help of the X-Feeder Testbox you can test in one single run:
– Whether the feeder has stored an error.
If this is the case, the test will be terminated and the corresponding error number will be
shown on the display. Reset the error and then restart the test.
The documentation supplied includes detailed instructions about how to reset the relevant
error.
– The functionality of the foil rocker
– The functionality of the tape drive
– The functionality of the foil disposal drive
●
Reference run (X feeder modules only)
●
Resetting the maintenance counter (only SmartFeeder X)
●
Updating firmware of the feeder module
●
Downloading the feeder module log file
NOTICE
Background illumination
To protect the background illumination and the display of the X Feeder Testbox, the display
and the lighting are switched off if the device is not used for more than 15 minutes.
To switch the display and lighting back on, turn or press the knob on the X Feeder Testbox.
The currently active function of this knob will not be executed in this case.
For a detailed description of how to operate the X Feeder Test Station, refer to the Job Guide "X
Feeder Test Station " (German [00196352-xx], English [00196353-xx], other languages on re-
quest).