Service Manual SIPLACE SmartFeeder - 第8页

8 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 Table of contents 8.16 Handle with control panel .. 234 8.16.1 Removing the handle assembly .. 235 8.16.2 Fitting the h…

100%1 / 246
7Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
Table of contents
8.7.2 Fitting the splice sensor.. 195
8.7.3 Removing the splice sensor.. 196
8.7.4 Fitting the Dummy Splice Sensor.. 198
8.7.5 Cable splice sensor.. 200
8.7.5.1 Removing the Cable Splice Sensor.. 200
8.7.5.2 Fitting the Cable Splice Sensor.. 201
8.8 Drives.. 202
8.8.1 Hybrid stepping motor assembly left / right.. 202
8.8.1.1 Removing the hybrid stepping motor assy... 203
8.8.1.2 Fitting the hybrid stepping motor assembly.. 204
8.8.2 Shifted gear for tape drive.. 205
8.8.2.1 Removing the shifted gear 1 tape left/right.. 206
8.8.2.2 Fitting the shifted gear 1 left / right tape.. 206
8.8.2.3 Removing the Toothed Wheel 4 Tape Left.. 206
8.8.2.4 Fitting the Toothed Wheel 4 Tape Left.. 207
8.8.2.5 Removing the Toothed Wheel 4 Tape Right.. 207
8.8.2.6 Fitting the Toothed Wheel 4 Tape Right.. 207
8.8.3 Shifted gear foil drive.. 208
8.8.3.1 Shifted gear foil drive left (lane 1).. 208
8.8.3.2 Shifted gear foil drive right (lane 2).. 212
8.9 Foil rocker.. 218
8.9.1 Foil rocker assembly.. 218
8.9.1.1 Removing the Foil Rocker Cpl... 219
8.9.1.2 Fitting the Foil Rocker Cpl... 219
8.9.2 Cable light barrier emitter.. 220
8.9.2.1 Removing the light barrier emitter cable.. 220
8.9.2.2 Fitting the light barrier emitter cable.. 221
8.9.3 Individual foil rocker parts.. 222
8.9.3.1 Removing the Spring Pin with Spring.. 223
8.9.3.2 Fitting the Spring Pin with Spring.. 223
8.10 Rocker.. 224
8.10.1 Rocker assembly.. 224
8.10.1.1 Removing the Rocker Complete.. 225
8.10.1.2 Fitting the rocker.. 225
8.10.2 Replacing the individual parts of the rocker.. 226
8.10.2.1 Removing the tamp wheel and bearing shaft.. 226
8.10.2.2 Fitting the tamp wheel and bearing shaft.. 226
8.11 Knurled Tamp Wheel.. 227
8.11.1 Removing the knurled tamp wheel left.. 228
8.11.2 Fitting the knurled tamp wheel left.. 228
8.11.3 Removing the knurled tamp wheel right.. 229
8.11.4 Fitting the knurled tamp wheel right.. 229
8.12 Stripper.. 230
8.12.1 Removing the wiper.. 230
8.12.2 Fitting the wiper.. 230
8.13 Flap Tape Disposal.. 231
8.13.1 Removing the Flap Tape Disposal.. 231
8.13.2 Fitting the Flap Tape Disposal.. 231
8.14 Foil disposal blade.. 232
8.14.1 Removing the Blade Partition Wall.. 232
8.14.2 Fitting the Blade Partition Wall.. 232
8.15 Leaf spring.. 233
8.15.1 Removing the Leaf Spring Infeed.. 233
8.15.2 Fitting the Leaf Spring Infeed.. 233
8 Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020
Table of contents
8.16 Handle with control panel.. 234
8.16.1 Removing the handle assembly.. 235
8.16.2 Fitting the handle assembly.. 236
8.16.3 Individual parts on the handle.. 237
8.16.3.1 Removing individual parts from the handle.. 238
8.16.3.2 Fitting individual parts to the handle.. 239
8.16.3.3 Removing the control panel, board and window for the control panel.. 240
8.16.3.4 Fitting the control panel, board and control panel window.. 241
8.17 Control board.. 243
1 Introduction
1.1 Safety instructions
Service Manual SIPLACE SmartFeeder 4 - 8 mm X / Xi SIPLACE SmartFeeder 2 x 8 mm X / Xi 11/2020 9
1 Introduction
This manual describes service work performed on the SIPLACE® feeder modules SmartFeeder
4-8mmX / Xi and SmartFeeder 2x8mmX / Xi.
The service work on the SIPLACE® feeder modules SmartFeeder 12–104mmX is described in
another service manual (German [00198780-xx], English [00198781-xx]).
1.1 Safety instructions
DANGER
Nonobservance of these safety instructions may cause injury to personnel and dam-
age to the machine!
► Please observe the safety instructions in the user manual of the relevant machine
for all work!
1.1.1 Conventions for the use of safety instructions and symbols
Safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid
damage to equipment. These notes are highlighted by warning triangles and are indicated as fol-
lows according to the level of risk:
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable
damage to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property
may occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indic-
ates a part of the manual that requires particular attention.
Symbols
Example Description
Next This typeface marks controls and interface elements in the software.
► This symbol indicates actions that have to be performed by the operator.