SIPLACE D2I 规格说明书英文版 - 第18页

18 Component Feeding Component Changeover Table SIPLACE component changeover tables are stand - alone modules that a re easy to maneuver and can be docked into th e machine. This ensure s that the tab le is accurately po…

PCB Barcode for Product-Controlled

Production (Option)

Label dimensions Stroke width (W): 0.19 < W 0.3 mm (corresponds to high and medium den-

sity), stroke length: mm, length of the barcode template window: 90 mm

Recommended label

colors

Coding: black, dark green, dark blue, background: white, beige, yellow, orange

(contrast ratio > 70% to DIN 66236)

Code types Code 39, Code 128 / EAN 128, Codabar, 2/5 IATA 2/5 industrial, 2/5 inter-

leaved, UPC, EAN, Pharma Code, EAN Addendum (others available on

request), a barcode filter may be defined

Laser scanner safety Laser diode 670 nm (red) / 1.2 mW

Laser protection class 2, degree of protection IP65

Downstream

machine

Upstream

machine

PCB

PCB barcode scanner 1D on top

PCB barcode scanner 1D on bottom

PCB barcode scanner Q [mm]

2D on top 390

1D on top 390

2D on bottom 430

1D on bottom 430

PCB barcode scanner L [mm]

1D on top 320 - 350

1D on bottom 380 - 410

PCB barcode scanner PCB rear projection [mm]

2D on bottom (dual conveyor) 17

PCB barcode scanner LQ [mm] RQ [mm]

2D on top 3 3

1D on top 3 3

2D on bottom 5 5

1D on bottom 5 5

PCB dimensions/conveyor LO [mm] RO [mm]

460 mm SC 3 20

508 mm SC 3 44

216 mm DC1 3 24

242 mm DC1, 430 mm SM1 3 58

216 mm DC2 3 3

242 mm DC2, 430 mm SM2 3 3

PCB dimensions/conveyor LU [mm] RU [mm]

460 mm SC 20 3

508 mm SC 44 3

216 mm DC1 3 3

242 mm DC1, 430 mm SM1 3 3

216 mm DC2 24 3

242 mm DC2, 430 mm SM2 58 3

SC - Single conveyor, DC1/2 - Dual conveyor, track 1/2, SM1/2 - Dual conveyor in Single conveyor mode, track 1/2

If there is a PCB dual conveyor installed on the placement machine, we can provide a special design for

retrofitting the 2D PCB barcode scanner "bottom".

Component Feeding

Component Changeover Table

SIPLACE component

changeover tables are stand-

alone modules that are easy

to maneuver and can be

docked into the machine.

This ensures that the table is

accurately positioned in the

placement machine. Reels

are kept in the tape container

on the component change-

over table. A cutting device

on the machine automatically

cuts the used tape. The com-

ponent changeover tables

can be set up directly on the

machine or in an external

set-up area with feeder mod-

ules. The benefits of offline

set-up are that the set-ups

can be prepared without

stopping the line. This allows

the set-up to be changed

very quickly using the

changeover table principle.

The component feeders are

at rest during the placement

process, which means that

components can be refilled

and tapes may be spliced

without stopping the

machine. If an optional com-

ponent barcode reader and

the Setup Center option are

installed, it is possible to read

and check the barcodes on

the tape reels. This makes

sure that the component is

allocated to the right track,

and the PCB placement can

be traced using traceability

software.

Dummy feeder modules are

used at unassigned locations

to protect the operators.

Component Feeding

Component Changeover Table

Technical Data

Length 753 mm

Width 570 mm

Height 922 mm for 830 mm PCB transport height

992 mm for 900 mm PCB transport height

1022 mm for 930 mm PCB transport height

1042 mm for 950 mm PCB transport height

Height of bottom edge of table

bed

680 mm for 830 mm PCB transport height

750 mm for 900 mm PCB transport height

780 mm for 930 mm PCB transport height

802 mm for 950 mm PCB transport height

Weight

without feeder modules

with feeder modules at all

locations

86 kg

122 kg

Reel diameter

standard

maximum

up to 432 mm (17")

483 mm (19")

Locations for feeder modules max. 15 (3 x 8 mm S)

Changeover time < 1 minute

Component feeding 2 CO changeover tables with tape reel holders and integral

waste containers

15 locations, each 30 mm wide, for each component

changeover table

Feeder module types Tapes, bulk cases, stick magazines, dip module, OEM

feeder modules (surf tape, component disposal module,

label feeder modules, inline programming feeder modules)

Component feeder table

Waste container

for remaining empty tape

Tape container

Communication

unit