00198424-03_JC_PM_WF3_JTF-ML2_EN - 第26页

www.asm-smt.com

5 WF3 JTF-ML2 Maintenance Remove Tower 5 min 1 / 1

CAUTION! Refer to safety instructions in user manual before commencing Maintenance

Machine Status OFF Conveyor Empty

NOTICE! ESD guidelines are to be followed Tool:

T31

Wear Part: Consumables:

www.asm-smt.com

1 Remove the two screws. 2 Move the tower while removing the screws

to reduce pressure.

3 Pull the tower out of the machine from the

slidings.

4 Place the tower at service area for main-

tenance.

www.asm-smt.com

6 WF3 JTF-ML2 Maintenance Clean Conveyor (JTF-ML2) 5 min 1 / 1

CAUTION! Refer to safety instructions in user manual before commencing Maintenance

Machine Status ON Conveyor Empty

NOTICE! ESD guidelines are to be followed Tool:

T67

Wear Part: Consumables:

www.asm-smt.com

1 For safety, use ESD wrist strap to pick up

components that are on the conveyor.

2 Check conveyor belt for contamination

and damage.

3 Clean all debris from belt.

4 Clean the debris stuck on the single disk

flexible coupling.