00198424-03_JC_PM_WF3_JTF-ML2_EN - 第31页
8 WF3 JTF-ML2 Maintenance Linear guide (Lifting axis) 5 min 1 / 1 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e Machine …
7 WF3 JTF-ML2 Maintenance Clean Tower and maintain Ball screw 5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T34, T67
Wear Part: Consumables:
C3, C49
www.asm-smt.com
7 If there is contamination, remove old
grease with lint free clothes.
8 Using a brush, apply thin layer of grease.
8 WF3 JTF-ML2 Maintenance Linear guide (Lifting axis) 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T34
Wear Part: Consumables:
C3, C49
www.asm-smt.com
1 Inspect for contamination or debris. 2 If there is contamination, remove old
grease with lint free clothes.
3 Using a brush, apply thin layer of grease.
4 Repeat steps 1 to 3 for right side linear
guide.
5 Assemble back tower cover by tightening
back the 12 screws.
www.asm-smt.com