00198424-03_JC_PM_WF3_JTF-ML2_EN - 第32页
www.asm-smt.com
8 WF3 JTF-ML2 Maintenance Linear guide (Lifting axis) 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T34
Wear Part: Consumables:
C3, C49
www.asm-smt.com
1 Inspect for contamination or debris. 2 If there is contamination, remove old
grease with lint free clothes.
3 Using a brush, apply thin layer of grease.
4 Repeat steps 1 to 3 for right side linear
guide.
5 Assemble back tower cover by tightening
back the 12 screws.
www.asm-smt.com
9 WF3 JTF-ML2 Maintenance Mount tower back onto TX machine 5 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31
Wear Part: Consumables:
www.asm-smt.com
1 Hold JTF at the two handles. 2 Hook in the tower. 3 Fasten the tower with two screws.