00198424-03_JC_PM_WF3_JTF-ML2_EN - 第36页
10 WF3 JTF-ML2 Maintenance Mount conveyor back onto TX machine 5 min 2 / 2 C A U T I O N ! R e f e r t o s a f e t y i n s t r u c t i o n s i n u s e r m a n u a l b e f o r e c o m m e n c i n g M a i n t e n a n c e…
10 WF3 JTF-ML2 Maintenance Mount conveyor back onto TX machine 5 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T69
Wear Part: Consumables:
www.asm-smt.com
1 Insert conveyor into the pivot. 2 Swing the conveyor down onto the JTF-
ML2 adapter.
3 Tighten the two screws.
4 Remove the two screws. 5 Remove the cover. 6 Push the plate until end position.
10 WF3 JTF-ML2 Maintenance Mount conveyor back onto TX machine 5 min 2 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T31, T69
Wear Part: Consumables:
www.asm-smt.com
7 Ensure that PCB is connected back in. 8 Cover and tighten the two screws. 9 Reconnect the 2 cables connectors and
tighten the 2 screws.
11 WF3 JTF-ML2 Maintenance Switch on machine and return the tables 6 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status ON Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
www.asm-smt.com
1 Switch on machine. 2 Cut the Tape. 3 Return COT.
4 Close the covers. 5 Press and hold COT button to dock table.