00198424-03_JC_PM_WF3_JTF-ML2_EN - 第4页
www.asm-smt.com Table of Contents
www.asm-smt.com
Introduction
Safety Introduction
Equipment required for Workflow 3 Maintenance JTF-ML2
1 Clean Cassette
2 Remove tables (COT) (JTF-ML2)
3 Shut Down Machine
4 Remove Conveyor
5 Remove Tower
6 Clean Conveyor (JTF-ML2)
7 Clean Tower and maintain Ball screw
8 Linear guide (Lifting axis)
9 Mount tower back onto TX machine
10 Mount conveyor back onto TX machine
11 Switch on machine and return the tables
12 Conduct reference run for JTF-ML2 and refill cassettes
13 Restart Production
Table of Contents
www.asm-smt.com
Table of Contents
www.asm-smt.com
Introduction
To ensure that your JTF-ML2 is always in perfect condition for use in your production environment, the machine should be maintained on a regular basis. In order to op-
timize the "Uptime" for each maintenance interval four workflows have been defined combining the individual steps to form an efficient sequences of tasks to be per-
formed. All workflows are explained in detail and illustrated with clear diagrams.
Maintenance workflows
Each workflow is supported with a document (job card), which guides you efficiently through the maintenance work. The Job Card at hand covers the tasks and se-
quence for workflow 1.
– Workflow 1: Weekly maintenance tasks.
– Workflow 2: Combination of weekly and 3-monthly maintenance tasks.
– Workflow 3: Combination of weekly and 6-monthly maintenance tasks.
Planning workflows
Example for the frequency of individual workflows over a period of one year.
– Workflow 1: 46 times / year
– Workflow 2: 4 times / year
– Workflow 3: 2 times / year