YSD_Users_E.pdf - 第258页
5-69 5 Creating the board data 2 Select the board to be subjected to dispense distribution. Select "Open Board Data" from the File menu or click the [Open B oard Data] button on the toolbar . The "Board da…
5-68
5
Creating the board data
7. Creating dot dispense information
The dot dispense information allows you to set dispense related information such as dispense position and
amount.
7.1 Dispense distribution
Executing dispense distribution using dispense parameters in the component mount information and
component information creates dot dispense data automatically.
This section explains how to execute dispense distribution.
1
Start the Editor.
Press the [Editor] button.
Starting the editor
Press the [Editor] button.
64541-N7-00
c
CAUTION
Dispense distribution cannot be executed for the file that is currently edited.
When you are editing the board data to be subjected to dispense distribution, save that board data, execute dispense
distribution, then open the board data again.
TIP
For detailed information on the Editor window, see "1.2 Editor window" in Chapter 7.
5-69
5
Creating the board data
2
Select the board to be subjected to dispense distribution.
Select "Open Board Data" from the File menu or click the [Open Board Data] button on the toolbar. The
"Board data select" dialog box appears.
1. Check that the "Folder" box shows the path to the folder that contains the board data you want to
select. If not, press the [Folder] button and specify the folder containing the board data and press
the [OK] button.
2. Select the file type from the File Type drop-down list.
3. Select the board data and click the [Select] button.
The selected board data is loaded and displayed in the Editor window.
Selecting the board data
Check the
folder path.
Select the file type.
64542-N7-00
Editor window
64543-N7-00
5-70
5
Creating the board data
3
Display the dot dispense parameters.
Click the Dot Dispense icon in the tree view (left pane) or click the [Dot Dispense] tab in the main view
(right pane).
4
Perform dispense distribution.
From the [Edit] menu, select [Dispense Distribute] - [Bond Distribute] or [Solder Distribute].
Dispense distribution will start and dispense coordinates will be created according to the mount data.
c
CAUTION
Performing dispense distribution will overwrite the dispense data which is in effect before dispense distribution.
Dispense Distribution
Select eithter command.
DIstributed data is displayed.
64544-N7-00
5
Sort the dispense coordinates.
From the Tool menu, select "Dispense Distribute" - "Sort" or "Sort at every head".
If you are going to check alignment amount, select [Sort at every head].
6
Perform an interference check.
From the Tool menu, select "Dispense Distribute" - "Interference Check".
Check whether the stopper steps on dispensed dots. If such a possibility exists, the related data rows will
be displayed, so correct them.