YSD_Users_E.pdf - 第342页
8-22 8 Managing the data 5 Check the settings for restore and start restoring the backup data. 1. When the “RESTORE” dialog box appears, check the flash disk drive and the path to the system full backup data. 2. After ch…
8-21
8
Managing the data
3
Restore the system data.
When the “VgosSystemFullBackup” dialog box appears, check that the backup data is for the machine
where you want to restore and click the [Next] button. The “FLASH DISK” dialog box then appears.
c
CAUTION
If a flash disk is connected to the PC , remove it and then click the [Next] button.
Checking the machine
Check here.
64816-N7-00
4
4onnect the flash disk.
When the flash disk is connected to the PC, it is detected by the PC and displayed in the dialog box.
The [Next] button becomes active, and click it to continue.
When flash disk is connected
Detected flash disk
64817-N7-00
c
CAUTION
• Windows Explorer may automatically start when a flash disk is connected to the PC.
If any application automatically starts, quit it.
• If the flash disk is not detected even after connecting it to the PC , remove the flash disk and then reconnect it again.
• Restoring will write the system full backup data over the data in the flash disk.
8-22
8
Managing the data
5
Check the settings for restore and start restoring the backup data.
1. When the “RESTORE” dialog box appears, check the flash disk drive and the path to the system full
backup data.
2. After checking, select the “Determine” check box, and the [Execute] button appears.
3. Click the [Execute] button to start the restore process.
Checking the restore settings and executing restore
Flash disk drive
Path to the system full backup data
“Determine” check box
[Execute] button
64818-N7-00
4. When finished restoring the system data, the “Success” dialog box appears. Click the [OK] button,
and the [Next] button in the “RESTORE” dialog box changed to the [Finish] button.
5. Click the [Finish] button to finish the restore process.
Restore process is complete
64819-N7-00
6
Install the flash disk into the machine.
Install the new flash disk containing the restored system data into the machine.
Restoring the system full backup data is now complete.
8-23
8
Managing the data
2. Creating the user database
Registering components (or marks) in the user database will prove convenient if they are not included in the
YAMAHA database or they are used very frequently.
The user database should be registered in the user area of the database. The user database area can be
from No. 1001 onward for the parts database and from No. 1 to No. 149 for the mark database. The
registered data in this area will be retained even if the software version is upgraded.
2.1 Registering data into the user database
This section explains how to register component data or mark data you have created to the user database.
1
Select the board name.
Press the [Board] button on the Setup screen and select the board name.
2
Open the board or mark information screen.
Press the [Board] button or [Mark] button in the main menu button area.
3
Select the copy source data.
Line up the cursor with the component data or mark data you want to copy from.
4
Open the database list.
Press the [Database] button on the Basic tab screen of the board or mark information.
The database list appears.
Copy source
Database list
64820-N7-00