YSD_Users_E.pdf - 第368页
1-4 1 Maintenance 2.2 Separately sold options T he following maintenance tools are sold separately as options. Optional parts GREASE GUN SET Roll paper for dot station Bent type nozzle Standard nozzle Flexible nozzle 531…
1-3
1
Maintenance
2. Preparing for maintenance tasks
Tasks described in this section focus mainly on replacing parts (consumable parts) that might cause a gradual
loss of machine functions during use.
2.1 Tools and materials supplied with machine
The following tools and items are supplied with the machine.
Parts supplied with machine
Standard parts
Air blow tool
Lithium-based grease
Test board
Lint-free paper wipe
Dispensing liquid disposal cup
Ceramic plate
Cleaning pin
53100-N7-10
n
Parts supplied with machine (Standard parts)
Product Name Parts List Designation Parts No. Note
Air blow tool AIR BLOW TOOL KU4-M8590-00X
Test board TEST BOARD KV6-M3801-00X
Lint-free paper wipe WIPER KGS-M3840-00X
Cleaning pin NEEDLE, PIERCE UNIT KM4-M3810-00X For nozzle cleaning
Lithium-based grease GREASE PACK K48-M3856-00X NSL 80g
Dispensing liquid disposal cup CUP KLR-M9372-00X 10 cups
Ceramic plate PLATE, DISPENSE KLR-M9417-00X 2 plates for dot dispensing
1-4
1
Maintenance
2.2 Separately sold options
The following maintenance tools are sold separately as options.
Optional parts
GREASE GUN SET Roll paper for dot station
Bent type nozzle
Standard nozzle
Flexible nozzle
53102-N7-10
n
Optional parts
Product Name Parts List Designation Parts No. Note
Grease gun (with standard nozzle) GREASE GUN K48-M3852-01X
GREASE GUN SET
KHW-M3852-A0X
Nozzle (flexible type) GREASE NOZZLE K48-M3857-00X
Nozzle (bent type) GREASE NOZZLE K48-M3854-00X
Roll paper for dot station
ROLL PAPER KM4-M9330-01X 1 roll
ROLL PAPER 10 KLR-M8C03-00X 10 roll
n
Precautions when handling grease
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR
LUBRICANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR LUBRICANT DOES NOT GET INTO THE EYES.
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT COMES INTO CONTACT WITH SKIN. BE SURE TO WEAR PROTECTIVE
GLOVES TO PREVENT CONTACT WITH SKIN.
w
WARNING
DO NOT TAKE ORALLY OR EAT GREASE OR LUBRICANT. EATING WILL CAUSE DIARRHEA AND VOMITING.
c
CAUTION
After use, tightly cap the grease tube to ensure dust, debris and moisture do not enter inside. Store the grease in a
dark location not exposed to direct sunlight and keep it away from fire and heating sources.
c
CAUTION
Always use the specified type of grease and apply it to the specified points. Failure to follow the correct greasing
procedures may damage the machine.
1-5
1
Maintenance
2.3 Required tools
Prepare the following tools and items necessary for maintenance.
n
Tool list
: Supplied with machine, : Options
Name Description
Phillips screwdriver Large, small
Slotted (flat-blade) screwdriver Large, small
Hex wrench set 1 set
Grease gun For grease filling (See section 2.2.)
Air blow tool For cleaning (KU4-M8590-00X)
Precision wrench set Used for maintenance of spline shafts.
Cleaning pin Used to clean nozzle holes.
n
Other tool list
: Supplied with machine, : Options
Name Description
Grease (lithium-based grease: NSL) Used to lubricate X and Y axes.
Cleaning paper Use lint-free cleaning paper or cloth that does not leave dust or residue.
Cleaning alcohol Use IPA (isopropyl alcohol) or ethanol.
Marker pen Used for marking when replacing conveyor belt.
n
Safety protective equipment
Name Description
Dust goggles
Always wear when handling IPA or air blow gun.
Dust mask