YSD_Users_E.pdf - 第74页
2-14 2 Basic operation n Manual head operation [Unit] – [Head] screen 1 T arget temperature and current temperature 64233-N7-00 1. [Blow] button Pressing each button dispenses adhesi ve. T o stop dispensing, press the bu…
2-13
2
Basic operation
5. [Left] button, [Right] button
Rotates the conveyor motor in the left or right direction at high speeds.
6. [Low Left] button, [Low Right] button
Rotates the conveyor motor in the left or right direction at low speeds.
7. [Exit Stopper] button
Raises or lowers the exit stopper that stops a board at the conveyor exit.
8. [Push Up] button
Pressing this button opens a dialog box for entering board thickness. Check or enter the board thickness to clamp the
board by pushing it up from the bottom (underside).
9. [Board Clamp] button
Clamps the board by pushing up its edges from the bottom (underside).
10. [Main Stopper] button
Raises or lowers the main stopper that stops a board in the clamp position on the conveyor.
11. [Entrance Stopper] button (Option)
Use this button to stop the incoming board at the standby position.
"Move Axis" screen
1
2
4
5
6
7
3
64232-N7-00
Button name Function
1 Zoom in/out (+, -) Zooms in or out the image. (16 times to 1/16 times)
2 Mark Light Allows changing mark lighting manually. Using this button does not affect data.
3 PTP
Displays the "PTP" dialog box that allows directly specifying the position where you
want to move the selected axis.
4 Step Mode
When this button is pushed in, the selected axis can be moved in "step mode (inching
mode)" with the arrow buttons at a specified step stroke (inching stroke).
5 Arrow Use these buttons to move the selected axis in the desired direction.
6 Head Select Select the head to operate (ZR axis only). All heads rotate with the R-axis.
7 Brake
Use this button when you want to release the brake during emergency stop. (PU axis
only)
The brake is automatically released when the servo is turned on.
2-14
2
Basic operation
n
Manual head operation
[Unit] – [Head] screen
1
Target temperature
and current temperature
64233-N7-00
1. [Blow] button
Pressing each button dispenses adhesive. To stop dispensing, press the button again.
2-15
2
Basic operation
n
Manual I/O operation
[Unit] – [I/O] screen
1
2
3
64234-N7-00
Button name Function
1 Select output display group
Select the output group for display in the "Output" status list. The
following groups can be selected:
• CONV (conveyor)
• HEAD
• OTHERS
2 Select input display group
Select the input group for display in the "Input" status list. The
following groups can be selected:
• INTLCK (interlock)
• CONV (conveyor)
• HEAD
• SPARE
• SRV (servo origin limit)
• OTHERS
3 ON/OFF Turns the selected valve on or off.